PTU Tutorial - On Top Of The World

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in April 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Dean Yeagle Tubes art. You must have a license to use his art which you can get here: http://www.cdoestore.com. You will need a full body tube with a close-up.

PTU Scrapkit collab at Stargazer Scraps called Save The Earth from A Taggers Scrap.  You can find this kit here: http://stargazerscraps.co.uk/

Mask of choice. I used Horseplay Pasture Mask #18, which you can get here: http://horseplayspasture.blogspot.com  

Plug-ins Xero - Radiance

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#8. Apply Horseplay Pastures mask#18. Merge mask layer visible. Select Xero – Radiance and apply effect. Setting is your choice.

Select décor #3, resize to (300x594) add to upper right side of mask. Select again but this time mirror and add to upper left side of mask.

Select bow #3 resize to (400x400) add to lower left side of tag. Select again but this time mirror and add to upper right side of tag.

Select leaves #4 resize to (400x237) add to upper right side to tag. Select again but this time mirror and add to lower left side to tag.

Select leaves, don’t resize. The sizing is ok. Just copy and place on top of your tag.

Select Fair dust #1 the sizing is ok, just copy and apply to the upper right side of your tag.

Select butterflies, the sizing is ok. Just copy and apply to upper left side of your tag.

Select earth, resize to (400x397) place at bottom of tag but make sure some of your elements and mask is showing.

Select your tube. The sizing of your tube will vary. I made mine (200x86) place on top of the earth.

Merge all layers.

Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

Scrapbook Version - On Top Of The World

Tag made for me using my FTU Kit

Savage from Redneck Tuts by Savage made this tag for me using my FTU Scrap Kit Pink is for girls. You can find her wonderful tutorial it's called: Strut Your Stuff here. If you follow leave her some love.

Scrapbook Version - Lavender Beauty

PTU Tutorial - Lavender Beauty

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in April 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com. You will need a full body tube with a close-up.

PTU Scrapkit called Lavender Fields  from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 65, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero - Mistifier

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#3. Apply my mask# 65. Merge mask layer visible.

Select Frame#6, resize to (600x592). Place on top of your finished mask.

Select Frame #6 again and resize to (500x492) and place inside the bigger frame.

Select Cluster frame, resize to (400x573). Place on right side of middle frame.

Select Ribbon# 5, resize to (400x196), place on top of flowers.

Select décor# 1, resize to (400x690) rotate to right and place on top of cluster frame.

Select Flower# 1 resize to (200x192), place on the right side of middle frame.

Select Flower# 6, resize to (200x192) place beside flower# 1.

Select tag#2, leave at the size it came in. Place it under the floral arrangement leaving part of it exposed.

Select tag#1, leave at the size it came in. Place it under the floral arrangement leaving part of it exposed.

Select your tube. Place it inside your middle frame. Erase any excess your do not need.

Merge all layers.

Go to effects, plugins, xero, Mistifier. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Mask #65

Just click on image for true size. Then right click and save to computer. If you save, leave some love.

PTU Scrap Kit - Olivia

I am using a PTU Scrap Kit by Lily Designs called I love Pink. You can find it here.

PTU Scrap Kit - Jakobi Making Easter Dinner

I am using a PTU Scrap Kit by et Designs. You can find it here.

PTU Scrap Kit - Chillin with the bunny

I am using a PTU Scrap Kit by et Designs. You can find it here.

FTU Scrap Kit - Happy Easter Baby

I am using a adorable FTU Scrap Kit by Ditz Bitz called Baby Girls Fist Easter. You can find it here.

Award

I received an award from Ditz Bitz. Thank you so much Brenda, this is truly exciting!!

FTU Scrap Kit - Brenda's Super Cooper

I am using a cute FTU Scrap Kit by Ditz Bitz called Super Cooper. You can find it here.

FTU Scrap Kit - Lavender Passion

I am using a beautiful FTU Scrap Kit by Ditz Bitz called Lavender Skies. You can find it here.

FTU Scrap Kit - Love of the sea

I am using a FTU Scrap Kit by Ditz Bitz called Golden Girl. You can find it here.

FTU Quick Page - Sweet Bunny

Just click on image for correct size, then right click and save to computer. If you save, leave some love.

FTU Quick Page - Happy Easter

Just click on image to bring up correct size of Quick Page. Then right click and save to your computer. If you save, please leave some love.

FTU Quick Page - Funny Easter

Just click on image to bring up actual size, then right click and save. If you save, please leave some love. This quick page was made with using a FTU Scrap kit by Lacarolita. You can find this wonderful kit here.

What Color Is Your Name Challenge at Scrapbookflair

This is my entry for the Scrapbookflair Challenge - What Color Is Your Name. You can find it here.

What Color Rose Are You Challenge at Scrapbookflair

This is my entry for the Scrapbookflair challenge - What Color Rose Are You? You can find it here.

White Challenge - Winter White

This is one of my entries for the White challenge at Scrapbookflair. You can find the challenge here.

PTU Tutorial - I'm Yours Forever

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tube by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called I’m Yours from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used Vix mask#44, which you can get here: http://www.freewebs.com/vixpsp/masks.htm.

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#5. Apply Vix mask#44. Merge mask layer visible.

Select ribbonswirl#2, place it in front of your mask.

Select frame #5, resize to (500x401), and apply over mask layer.

Select mat, place behind frame.

Select leaves, resize to (300x591), and apply to right side of frame. Duplicate and mirror another. Place on left side of frame.

Select décor#1, resize to (100x414) apply to right side of frame. Duplicate and mirror another. Place on left side of frame.

Select flowers#5, resize to (200x153) add to the bottom of the frame. Duplicate 3 more times and arrange the around the fame.

Add your tube. I am making it look like my tube is coming out of the frame. Erase any part of your tube that is exposed to make it look like she is coming out of the frame.

Select basket, resize to (200x181), place on left side of your tag.

Select candle#3, resize to (100x128), place just slightly off to the right side of the basket.

Select rose#1, resize to (200x61) rotate rose to the left. Place rose on your tube. Erase any excess you don’t need.

Select bouquet,, resize to (200x188) place like your bouquet is in your basket. Erase any excess teddy you do not need.

Select teddy, resize to (200x253) place to were it looks like your teddy is on the basket. Erase any excess teddy you do not need.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

 Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

Digital Scrapbook Version - I'm Yours Forever

FTU Scrap KIt - Our First Kiss

I am using a beautiful FTU Scrap Kit by Ditz Bitz called First Kiss. You can find it here.

PTU Tutorial - Got the blues

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in April 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

 Supplies Needed:

Tubes of your choice. I used Ismael Rac Tubes art. You must have a license to use his art which you can get here: http://xeracx.net/store/. You will need a full body tube with a close-up.

PTU Scrapkit called Got The Blues from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used Vix mask143 and 151, which you can get here: http://www.freewebs.com/vixpsp/masks.htm.

Plug-ins Xero - Radiance

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#15. Apply Vix mask#151. Merge mask layer visible.

I used paper#13 and applied Vix mask#143. Merge mask layer visible. Then merge all visible.

Make a copy for your mask for later use.

Select sparles#1, place on top of your masks.

Select ribboncurl#1, resize to 500x344 and place at top of your image.

Select ribboncurl#3. Flip image and resize to 500x344, place at the bottom of your image.

Make a circle text and type this saying. Got The Blues, Let Me Cheer You UP… Use any color your like and any font.

Select your tube, resize to 550x428 and place at bottom of your image.

Select frame#8, resize to 300x233 and place at left side of your image.

Select paper#18, resize to 300x300 and place behind your frame#8. You will have to erase the excess paper from around your frame.

Select your close up tube shot. Resize to 400x237. Place in frame#8. Select your Opacity and decrease it to 52%.

Select your close up tube shot. Mirror image, resize to 400x237. Place in frame#8. Select your Opacity and decrease it to 52%.

Select your close up tube again, resize to 550x428. Place it in frame#8. You will have to erase the excess around the frame.

Select the copy of your mask you made. Resize it to 200x200. Place it on the right side of frame#8.

Merge all layers.

Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

My First FTU Scrap Kit - Pink Is 4 Girls

You can download here.

Remember to leave some love if you download!


 I hope you enjoy it!