The Brat Pack Blog Train

Pages

Monday, May 30, 2011

PTU Tutorial - Love Is

.
This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 30, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Pick your tube that has a closed up and a profile. I am using the beautiful tubes by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called Magical Love by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Plug-ins Xero - Radiance
Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select ele#14, no need to resize. Copy and paste to upper left side of tag. Select again and mirror. Copy and paste to lower right side of tag.
Select frame#3, resize to (600x503). Copy and paste to center of tag.
Select paper#2, resize to (300x300). Copy and paste behind frame. Then erase any excess of paper sticking out.
Select tube, chose the close up shot. Resize to fit into your frame. Sizing will vary depending on your tube.
Once tube is in the frame, opacity it to 69%.
Select your full profile tube. Resize to fit on right hand side of tag. Resize will vary depending on your tube.
Select ele#42, resize to (300x221). Copy and paste on top of your frame. Add a drop shadow.
Merge all layers.
Add name, url, copywrite and watermark.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Then add, drop shadow.
Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria
 
Resize, to the size you want your finished tag to be.

Thursday, May 26, 2011

PTU Tutorial - Mother Nature

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Barbara Jensen. You must have a license to use her art which you can get here: http://www.eroticartistgallery.com/
PTU Scrapkit called Earthly Body by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
I used Mask #209 by weescotslass, which you can get http://weescotslasscreations.blogspot.com/
Plug-ins Xero - Radiance
Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select paper#3, resize to (600x600). Copy and paste to your new image.
Select grass, resize to (700x273). Copy and paste to bottom of paper#3.
Select your tube to make it look like the tube is coming out of the water into the grass. I resized mine to (300x399).
Select pebbles, resize to (300x80). Copy and paste to left side of grass. Duplicate and copy to right side of grass.
Select bird, resize to (100x114) Copy and past to right side of tag.
Select bird#2, resize to (100x108) Copy and place on right side of tag.
Merge all visible.
Select weescotlass mask #209. Apply weescotslass mask#209. Merge mask layer visible.
Select the mask you have just make. Make an extra copy of it and set aside for later use.
Select tree#1, no need to resize. Copy and paste behind mask at top right side of tag. Duplicate and place at top left side of tag just a slight higher.
Select grass, resize to (600x234) Copy and paste to bottom of tag. Erase and excess that is infront of your tube to make it look like tube is coming out of the grass.
Select painting#1, resize to (200x261) Copy and paste to lower right side of tag. Place behind grass.
Select the extra copy of finished mask that you had set aside. Resize it to (200x200). Place on top of painting to make it look like your mask is what is being painted. Then opacity, to 72.
Merge all layers.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Then add, drop shadow.
Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

PTU Tutorial - Mystical Whispers

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used two Joel Adams Tube art. You must have a license to use his art which you can get here: http://www.cdoestore.com/
PTU Scrapkit collab at Stargazer Scraps called Whispering Touch from A Taggers Scrap.  You can find this kit here: http://stargazerscraps.co.uk/
. Thanks Jo!
I used Mask #218 by weescotslass, which you can get http://weescotslasscreations.blogspot.com/
Font of your choice.
Plug-ins Xero - Porcelain
Let's begin shall we.
Open new image 600x600.
I used paper#2. Apply weescotslass mask#218. Merge mask layer visible.
Select décor#3, resize to (600x280). Copy and paste to the lower part of your tag. Duplicate and place at the top of your tag.
Select décor#2, no need to resize. Copy and place at lower left side of tag. Select again, rotate to the right twice. Copy and paste to the upper right hand side of tag.
Select butterflyscatter, resize to (600x563). Copy and paste, centering it up on your tag.
Select lamp, resize to (150x458) Copy and past to left side of tag. Duplicate and place on right side of tag.
Select frame #4, resize to (500x415). Copy and paste to center of tag.
Select flowers, resize to (300x126) Copy and paste to bottom of frame. Do this two more times placing them randomly at bottom of frame.
Select hangingflower, no need to resize. Copy and paste to upper left side of frame. Then mirror hangingflower. Copy and paste to upper right side of frame.
Select brad, no need to resize. Copy and paste to upper center of frame in between hangingflowers.
Select paper#3, resize to (400x400). Copy and paste behind frame. If you see any excess, erase it.
Select lantern, resize to (300x253). Copy and paste to upper right side of paper#3 in side of frame. No need to erase excess that is sticking out.
Select diamondscatter, resize to (300x253). Copy and paste on paper#3 in side the frame. Also behind the lantern.
Select unicorn, no need to resize. Copy and paste it to make it look like it is sitting in the frame. Erase any part of the frame to make it look like it is coming out of it.
Select tube, reaize to to fit on top of your uniforn. I resized mine to (300x253). Erase and excess of frame#4 to make it look like your tube is coming out of the frame along with the unicorn.
Select second tube, resize to (300x388). Copy and paste to upper left side of tag.
Select fairydust, resize to (600x575) Copy and paste on top of tag.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Mystical Whispers

Monday, May 23, 2011

PTU Tutorial - Seaward

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Legends Art. You must have a license to use this art, which you can get here: http://www.scrapsandthecity.com/
PTU Scrapkit called Under The Boardwalk from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
I used my FTU Mask #61, which you can get http://mistressv-signaturecollections.blogspot.com/.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open new image 600x600.
I used paper#14. Apply my mask#61. Merge mask layer visible.
Select net, resize to (600x221). Copy and paste in the middle of mask layer. Add a drop shadow.
Select net #2, resize to (500x601). Copy and paste to the right of tag. Add a drop shadow.
Select décor #1, no need to resize, copy and paste to upper right side of tag. Then select again this time mirror, and place at lower left side of tag. Add drop shadow to both items.
Select wheel. Resize to (600x600) copy and paste in center of tag.
Select tube, resize to (500x642) copy and paste under wheel. Erase portions of the wheel to make it look like tube is coming out of it. Then erase excess tube.
Merge wheel and tube, add drop shadow.
Select starfish, no need to resize. Copy and paste to left side of tag, add drop shadow. Duplicate and add to right side of tag.
Select shell #1 resize to (200x173) copy and paste on left side of tag. Add drop shadow. Duplicate and add to right side of tag.
Select shells, no need to resize. Copy and paste in lower middle of tag. Add a drop shadow.
Select shell #6, resize to (200x164). Copy and paste to bottom middle of tag. Add drop shadow.
Select word art, no need to resize. Copy and paste in front of sea shells and add a drop shadow.
Select seagull, resize to (200x133). Copy and paste on left side of word art. Add a drop shadow. Duplicate and mirror. Add to lower right side of tag.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Seaward

PTU Tutorial - Dark Emotions - Forum Set

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Verymuch Tubes art. You must have a license to use her art which you can get here http://picsfordesign.com/
 PTU Scrapkit called Dark Emotions by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Plug-ins Xero - Porcelain
Font of your choice.
Let's begin shall we.
Banner:
Open new layer 650x250.
 Select and fill with paper #DA-pp9.
Select DA-el23, no need to resize just copy to middle of tag.
Select your tube. Resize to (500x671) once again it will depend on what tube you use. Make it a close up.
Place on right side of tag. Mirror and copy to left side of tag.
Go to image, add a border. Pick the color you would like your border to be. Size your pixels to 10.
Select your magic wand, place at inside of border. Make sure you have marching ants around your border. Select effects, 3d effect, inner bevel. Set the setting to your liking
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as jpeg.
Avatar:
Open new layer 200x200
Work the same as you did with the banner, but using one tube and do not use work art.
Add your first initial to the to the bottom right side of your avatar.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as jpeg.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Thursday, May 12, 2011

FTU Frame Cluster #25

FTU Frame Cluster, just click on frame for correct size. Then right click and save to your computer. If you save, leave some love.

Tuesday, May 10, 2011

Monday, May 9, 2011

PTU Tutorial - Pink

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 9th 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called The Pink Life from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
I used my FTU Template called Pink, which you can get http://mistressv-signaturecollections.blogspot.com/.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open template, select your papers to fill your template. I have selected the following. Paper 4 for rec. #1. Paper 28 for rec #2. And paper 18 for the circle. Everything else I left the way it is.
Select tinyleaves, you do not need to resize. Apply to template in between the star mask and rec. #1 on left hand side of template. Duplicate and mirror tinyleaves and place on right side of template between the star mask and rec. #1.
Select wings, no need to resize. Place at top of template between star mask and  tinyleaves. Duplicate and add to bottom of template.
Select décor #2, no need to resize. Place at top of template between star mask and rec. #1.
Select diamondheart #1, no need to resize and place on upper left side of tag. Duplicate and place on right side of tag.
Select flowerscatter, no need to resize. Place in between circle dots and circle on template.
Select posey, no need to resize. Place into left hand side of circle dots in. Then duplicate and place the second one inside the circle dots on the right hand side.
Select sparkles, no need to resize. Place in between circle and word art.
Select spotlight, resize to (400x684). Place at upper right side to tag.
Select knots, no need to resize. Place it between rec. #1 and rec #2.
Select leaves #2, no need to resize. Place int between rec #1 and rec#2 on left hand side. Duplicate and place on right hand side.
Select tube, resize will very. I resized mine to (400x401). Place anywhere you like.
Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
 Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Pink

FTU Template - Pink

This is my new FTU Template called Pink. You can download it here. If you download, leave some love.

PTU Tutorial - Fairy Tale

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 9, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
TPTU Scrapkit called Fairy Meadows by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
I used my FTU Template Fairy Tale, which you can get http://mistressv-signaturecollections.blogspot.com/.
Mask of choice. I used my mask# 65, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero - Mistifier
Font of your choice.
Let's begin shall we.
Open new image 800x601
I used paper#9. Apply my mask#65. Merge mask layer visable.
Select dust resize to (600x600), place on top of mask.
Open template, select your papers to fill your template. I have selected the following. Paper 10 for bottom doodle. Paper 9 for center circle. And paper 7 for left and right circle.
Select butterflies #5, resize to (200x209) Place in left circle of template. Duplicate and place in right circle of template.
Select doodle #7, do not resize. Place on top of center circle.
Select lani# 4, resize to (600x628). Place in center of template.
Select all word art, fill with paper # 2. Place to so your fairy will not be covered up. Then merge all word art. Once merged add a drop shadow so words will stand out.
 Merge all layers.
Go to effects, plugins, xero, Mistifier. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Fairy Tale

FTU Template - Fairy Tale

This is my new FTU Template Called Fairy Tale. You can down load it here. If you download, please leave some love.

Thursday, May 5, 2011

PTU Tutorial - Summer Fling

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 5, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used PinUp Tubes art. You must have a license to use their art which you can get here: http://www.cdoestore.com
PTU Scrapkit called Tropical Island Dream by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask# 66, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero - Porcelain
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper#9. Apply my mask#66. Merge mask layer visible.
Select el#66, rotate to the right. Resize to (500x594) place on top of mask, in center.
Select pp#6, resize to (500x500) place behind frame. Erase any excess pp6 you do not need.
Select el#2, resize to (200x304) place on far left side of frame. Duplicate and place on far right side of frame.
Select again and place el#2 near the next to each one you just place but on the inside to make a total of 4 copies of el#2.
Select el#33. Resize to (300x84) copy underneath your tube at the bottom of the frame, then duplicate and place another roll of rocks.
Select el#3, resize to (400x591) place on left side of tag. Duplicate and mirror. Place on right side of tag.
Select el#12, resize to (300x435) place on left side of tag in front of el#3. Duplicate and place on right side in front of el#3.
Select el#2, resize to (200x304) place on far left side of frame. Duplicate and place on far right side of frame.
Select el#34, resize (200x194). Place in front of palm tree ferns on left side of tag. Duplicate, and add to the right side.
Select your tube. I am using a Pinup tube and placing her like she is coming out of the frame. Resize varies.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Summer Fling

FTU Mask #66

Just click on mask to get correct size. Then right click and save to your computer. If you save, leave me some love.

Monday, May 2, 2011

PTU Tutorial - Naughty Chocolate

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 2, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.
 
Supplies Needed:
Tubes of your choice. I used PsycoJimi Tubes art. You must have a license to use his art which you can get here: http://www.mistakenart.com
PTU Scrapkit called Chocolate Lovers Dream by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used Horseplay Pasture Mask #7, which you can get here: http://horseplayspasture.blogspot.com  
Plug-ins Xero - Porcelain
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper#3. Apply Horseplay Pastures mask#7. Merge mask layer visible.
Select el#66, resize to (600x501) place on top of mask.
Select el#71, no need to resize. Place on lower left hand side. Re-select and mirror. Copy to upper left hand side.
Select frame #4, no need to resize, copy and apply on top of mask.
Select your tube. Place in center of your frame. I made my tube look like she was coming out of the frame. Erase part of the frame to get that effect.
Select el#44, resize to (200x134), copy and place on left side of tag.
Select el#42, resize to (200x226). Copy and place on right side of tag.
Select el#41, resize to (200x89). Copy and place on lower left hand side of el#44.
Select el#22, resize to (100x97). Copy and paste to lower right hand side of el#42.
Select el#26. Write a name or message in the tag element. I selected the word art el#2, resized to (100x59) and placed it inside el#26. Then added my name for the person I am making the tag for.
Once you have finished your message on el#26. Merge all layers and then resize to (100x103) copy and paste to bottom part of frame.
Select el#69, resize to (50x50) copy and place on top of hole on el#26.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria
.

Scrapbook Version - Naughty Chocolate

Sunday, May 1, 2011

Scrapbook Version - Funky Fresh

PTU Tutorial - Funky Fresh

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Barbara Jensen. You must have a license to use her art which you can get here: http://www.eroticartistgallery.com/
PTU Scrapkit collab at Stargazer Scraps called Funky Fresh from A Taggers Scrap.  You can find this kit here: http://stargazerscraps.co.uk/
. Thanks Jo!
I used my FTU Template #3 called Funky Fresh, which you can get http://mistressv-signaturecollections.blogspot.com/.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open template, select your papers to fill your template. I have selected the following. Paper 2 for oval. Paper 3 for rec.
Select glitter #4 no need to resize. Copy and paste behind blue oval on template.
Select scattered tiles, no need to resize. Copy and paste on top of glitter #4.
Select splat #6, no need to resize. Place at upper right side of tag behind template.
Select splat #1, no need to resize. Place at lower left side of tag behind template.
Select your tube, place on top of template.
Select plate #2, no need to resize. Place over tube, toward the left side of tag.
Select kiss, no need to resize. Place at bottom of plate.
Select sparkle, no need to resize. Place at left side of tag in front of tube.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

FTU Template - Funky Fresh

You can download it here. If you download, please leave some love.

1st Annual PSP Community Blog Hop Offical Kick Off May 1/ May 8

I am extremely pleased to announce that the 1st annual PSP Community Blog Hop is underway!!
Drop by and see some awesome work by the PSP Community!! Let's start hopping.