Pussycat

I made this tag using Fantasy Dreams Designzs PTU Kit called Pussycat. You can find her kit here. If you download, leave her some love.

PTU Tutorial - Colors Of Fall



This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on September 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tubes by Ismael Rac. You must have a license to use his art which you can get here: http://store.xeracx.net/

PTU Scrapkit called Think Fall from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero - Porcelain

 Let's begin shall we.

Open a new image,  600x600.

I used paper#16. Apply my mask#73. Merge mask layer visible.

Select scatter2, resize to (600x575). Copy and paste at upper right side of mask.

Select tree, no need to resize. Copy and paste to upper left side of tag. Re-select, mirror image and copy and paste to upper right side of tag.

Select window, resize to (400x492). Copy and paste to center of tag. Add a drop shadow.

Select paper1a. resize to (400x400). Copy and paste behind window. Erase any excess you do not need.

Select flower9, resize to (200x190). Copy and paste to upper left side of window.

Select gem, resize to (50x50). Copy and paste to center of bow (flower9).

Select tube, resizing will vary. I copied and pasted mine just to the left side of window. Add a drop shadow.

Select mushroom1, resize to (100x150). Copy and paste twice, one to lower far left side of tag and one on the right.

Select greenery, resize to (300x164). Copy and paste to bottom left side of tag. Reselect, mirror and copy to bottom right side of tag.

Select floral 3, resize to (200x151). Copy and paste to bottom left side of tag. Reselect, mirror and copy and paste to bottom right side of tag.

Select floral 4, resize to (200x95). Copy and paste to bottom left side of tag. Reselect, and copy to bottom right side of tag.

Select scatter1a, resize to (600x220). Copy and paste to bottom of tag.

Select pumpkindecor, resize to (300x216). Copy and paste on top of greenery on the left side. Reselect, mirror and paste on top of greenery on the right side.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

Sweet and Innocent

This tag was made by me using Fantasy Dreams Designzs FTU Kit called Mica. You can find it here. If you download, leave her some love for all her hard work.

PTU Tutorial - Best Friends

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of Gorjuss Art. You must have a license to use her art which you can get here: http://www.gorjussarthome.com/store/

PTU Scrapkit called Best Friends Forever from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2011/09/best-friends-forever.html Thanks Deanna

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

 Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper# 14. Apply my mask#73. Merge mask layer visible.

Select beads, no need to resize, copy and paste on top of mask.

Select heartsprays, no need to resize. Copy and paste on top of beads twice. One on left hand side and one on right hand side.

Select butterflies, no need to resize. Copy and paste on top of heartsprays.

Select sparkles, resize to (500x595) Copy and paste in center of tag.

Select stringhearts, no need to resize. Copy and paste on top in center. Add a drop shadow.

Select paper#04, resize to (250x250). Copy and paste behind heart on left hand side. Erase any excess you do not need.

Select paper# 01, resize to (250x250). Copy and paste behind heart on right hand side. Erase any excess you do not need.

Select tubes, resizing will vary. Copy and paste inside of hearts. Erase any excess you do not need.

Select wordart, no need to resize. Copy and paste to middle of tag towards the bottom. Add a drop shadow.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



PTU Tutorial - Trick or Treat

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

PTU Scrapkit called Halloween Time Collab. by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 75, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#08. Apply my mask#75. Merge mask layer visible.

Select ele#22, resize to (500x500). Copy and paste on top of mask at bottom.

Select ele#40, resize to (150x408) Copy and paste to bottom left side of tag.

Select ele#39, resize to (300x388) Cope and paste behind fence on right hand side.

Select ele#45, resize to (300x266). Copy and paste to lower right side of tag.

Select ele#41, resize to (200x295) Copy and paste to lower left side of tag.

Select ele#46, resize to (300x260). Copy and paste to lower center of tag.

Select ele#34, resize to (50x50) Duplicate several time and paste it randomly around tag behind mask.

Select ele#31, , resize to (50x50) Duplicate several time and paste it randomly around tag behind mask.

Select ele#50, resize to (500x173) Copy and paste on top of moon.

Add name, url, copywrite and watermark.

Merge all layers.

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**



PTU Tutorial - Happy Birthday Princess

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used PinUp Tubes art. You must have a license to use their art which you can get here: http://www.cdoestore.com

PTU Scrapkit called Birthday Bash Collab. by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#11. Apply my mask#70. Merge mask layer visible.

Select ele#59, resize to (200x300). Copy and paste to right side of mask up on the hill. Reselect, mirror and place on left side of tag on top of hill.

Select ele#60, resize to (100x217). Copy and paste in center on top of hill.

Select ele#50, resize to (200x131). Copy and paste twice. One to upper right side of tag and one to upper left side of tag.

Select ele#24, resize to (450x97). Copy and paste like a banner hanging off of the castles.

Select ele#52, resize to (600x600). Copy and paste to upper portion of tag.

Select ele#10, resize to (600x379). Copy and paste at bottom of tag.

Select tube, resizing will vary. Copy and paste on top of grass.

Select ele#19, resize to (200x353). Copy and paste behind tube to make it look like she is holding the balloons.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



FTU Template - Bewitched

Template by Signature Collections, Download here. If you download, leave some love.

                             I made this template for                          
The BNB Blog Train
but due to health problems of the train mistress
the train could not leave its station,
so with a group of partecipating
we have decided to publish the same our kits

Here is the list:


Carmen


Chantal


Charlieonline


Ellanoir


Loretta B.


Mandi D


Pink's Poetic Scraps


Signature Collections by Victoria







   

FTU Template - Immortal

Click here to download. If you download, leave some love.

FTU Mask #76

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.



FTU Mask #75

To save my mask, just click on image to get correct size. Then right click and save to your computer. If you save, leave some love.



FTU Mask #74

To save my mask, just click on image to bring up correct size. Then right click and save to your computer. If you save, leave some love.



FTU Mask #73

To save my mask, just click on image to get the correct size. Then right click and save to your computer. If you save, leave some love.



FTU Mask #72

To save my mask, just click on image to get collect size. Then right click and save to your computer. If you save, leave some love.

FTU Template - Happy Halloween

You can download my template here. If you download, leave some love.



FTU Mask# 71

To save my mask, just click on image for correct size. Then right click an save to your computer. If you save, leave some love.



PTU Tutorial - Autumn Bliss

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written September 7th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of PinUpToons. You must have a license to use his art which you can get here: http://www.cdoestore.com

PTU Scrapkit called Autumn Wishes from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2011/07/autumn-wishes-ptu.html  Thanks Deanna

Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero - Porcelain

 Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper# 10. Apply my mask#70. Merge mask layer visible.

Select leaves, no need to resize. Copy and paste on top of mask.

Select tree3, resize to (300x418). Copy and paste to upper left side of tag. Add a drop shadow.

Select tree2, resize to (300x408). Copy and paste to upper right side of tag. Add a drop shadow.

Select frame3, resize to (400x400). Copy and paste to center of your tag. Add a drop shadow.

Select paper9, resize to (400x400). Copy and paste behind frame. Erase any excess you do not need.

Select tube, sizing will vary. I picked a close up view for the frame. I put a 75% composite for the close up. The full body tube, I copy and pasted on the left side of tag. Add a drop shadow.

Select flowerdoodle, no need to resize. Copy and past to bottom right side of tag. Reselect, this time mirror image. Copy and paste to lower left side of tag. Add drop shadow to both.

Select bow3, resize to (300x140), Copy and paste to center of flowerdoodles were the come together at the frame. Add a drop shadow.

Select flower5, resize to (100x100). Copy and paste several times randomly around bottom of tag. Add a drop shadow to each one.

Select pinecones, resize to (100x80), Copy and paste several time on top of flower5. Add a drop shadow to each one.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



FTU Mask#70

To save my mask, just click on image to get the collect size. The right click and save to your computer. If you save, leave some love.



PTU Tutorial - Autumn Dreams

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on September 6^th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of PinUpToons. You must have a license to use his art which you can get here: http://www.cdoestore.com

PTU Scrapkit called Autumn Is Coming by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 69, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#2. Apply my mask#69. Merge mask layer visible.

Select ele#50, resize to (500x517). Copy and paste on top of mask.

Select pap05, resize to (400x400), Copy and paste behind frame. Erase any excess you do not want.

Select tube, sizing will vary. Copy and paste in front of frame.

Select ele37, resize to (400x439). Copy and paste to right side of tag.

Select ele17, resize to (50x52). Copy and paste on perch of birdhouse.

Select ele04, resize to (400x446). Copy and paste to left side of tag.

Select ele02, resize to (200x99). Copy and paste to lower left side of tag.

Select ele48, resize to (100x123), Copy and paste to lower right side of tag.

Select ele46, resize to (150x139) Copy and paste to lower left side of tag.

Select ele35, resize to (200x134). Copy and paste to lower middle of tag.

Select ele82, no need to resize. Copy and paste to lower left  of tag. Reselect and mirror. Then copy and paste to lower right side of tag.

Select ele49, resize to (200x200). Copy and paste to upper left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!



FTU Mask #69

Click on image for correct size. Then right click and save to your computer.

If you save, leave some love.

PTU Tutorial - Magic

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on September 5th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.

PTU Scrapkit called Dark Romance from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 68, which you can get here.

Font of your choice.

Plug-ins Xero – Bad Dream

 Let's begin shall we.

Open a new image,  600x600.

I used paper#24. Apply my mask#68. Merge mask layer visible.

I did resize my mask to (800x800) Copy and paste to new image.

Select leaves#4, rotate to right no need to resize. Copy and paste at the bottom of tag.

Select tube, resizing will vary. Copy and paste in the center of mask. Add drop shadow.

Select frame#7, resize to (600x552).  Copy and paste on around mask.

Select flower#4, resize to (100x96) Copy and paste several times around bottom of tag. I added two on the left side of tag, one in the middle and two on the right side of tag.

Select flower#5, resize to (100x96). Copy and paste twice and place one on each side of flower#4 in the center.

Select leaves#4, resize to (200x147), rotate to the right. Copy and paste to left side of tag at the bottom. Select again, this time mirror image and paste it the right side of tag.

Select leaves#2, resize to (200x118), Copy and paste one to lower left side of tag. Then again to lower right side of tag.

Select metalflower#3, resize to (100x101). Copy and paste twice. Once to lower left side of tag. And once to lower right side of tag.

Select leaves, resize to (200x74). Rotate to the right. Copy and paste twice. Both at lower bottom of tag in front. One left side and one right side.

Select flowerscatter#4, resize to (200x77). Copy and paste twice. One on lower left side of tan and one lower right side of tag near center.

Select flowerscatter#5, resize to (200x77). Copy and paste twice. One on lower left side of tan and one lower right side of tag near center.

Select flowerscatter, resize to (200x56). Copy and paste four times. Two copies upper left side of tag and two copies at upper right side of tag.

Add name, url, copywrite and watermark.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!



FTU Mask 68

Just click on image. Then right click and save to your computer. If you save, leave some love.



FTU Template - Make Me Purr

You can download it here. If you download, leave some love.



FTU Template - Freaky Chick

You can download my FTU Template here. If you download, please leave some love.

                                                   I am using a FTU Kit called Emo Babe.

You can find it here at Toxic Designs Blog. If you download, leave here some love.