FTU Mask #87

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.



The Brat Pack Blogtrain - Kick Start My Heart

It's time for the latest Brat Pack Blogtrain.  It's called Love Letters.  This is my contribution.  Click the Frame Cluster above to bring up correct size. Then right click and save to your computer.

Now hop on board the train and visit some of the other stations.





Stina ::designs by stina::

Tootypup: Tootypup Scraps

Anita: Daydreamers

Carrie: Skinnis Stats and Scraps

Chris: DCCreations

Em: EmJay Scraps

Holly: Freeks Creations

Jen: Jens Sweet Temptations

Ketty: Charlieonline.it

Miriam: Ellanoir

Paula: Craftypoly

Pink: Pink's Poetic Scraps

Stu: CreativeCrazyScraps

Suzy: SuzyQ Designs

PTU Tutorial - Don't Love Me

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on February 13, 2012.

This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tube of your choice. I used the art of Ismael Rac. You must have a license to use his art which you can get here: http://store.xeracx.net

PTU Scrapkit called Don’t Love Me by NaughtyAngelzCreationz.  You can find this kit herehttp://naughtys-creations.blogspot.com

Thanks NaughtyAngel

Mask of choice. I used my mask#18 and #70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Use paper#09. Apply my mask #70. Merge mask layer visible.

I used paper#09. Apply my mask#18. Merge mask layer visible. Copy and paste on top of mask#70.

Select el#15, resize to (300x150). Copy and paste to lower right side.

Select el#2, resize to (550x207). Copy and paste to bottom of tag.

Select frame#2, resize to (400x400). Copy and paste to upper center of tag, Add a drop shadow.

Select paper#09, resize to (400x400). Copy and paste behind frame. Erase any excess you will not need.

Select tube, resizing will vary. Copy and paste behind frame. Erase any excess you do not need of frame and tube. We want the tube too look like it is coming out of the frame.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



PTU Tutorial - Little Ballerina

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on February 13, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

PTU Scrapkit called Ballerina Girl by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 86, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#14. Apply my mask#86. Merge mask layer visible.

Select ele#26, no need to resize. Copy and paste on to mask.

Select ele#30, no need to resize. Copy and paste on tag.

Select ele#29, no need to resize. Copy and paste on tag.

Select ele#42, no need to resize. Copy and paste to center of tag.

Select pap#14, resize to (500x500). Copy and paste behind ele#42. Erase any excess you do not need.

Select ele#37, no need to resize. Copy and paste in front of frame.

Select ele#45, resize to (300x182). Copy and paste twice once to bottom left side of tag and the other to bottom right side of tag.

Select ele#47, resize to (100x234). Copy and paste to bottom right side of tag.

Select ele#24, resize to (500x349). Copy and paste to bottom of tag.

Select ele#36, resize to (150x79). Copy and paste to bottom center of tag.

Select ele#22, resize to (100x210) Copy and paste to bottom left side by end of frame.

Select ele#17, no need to resize. Copy and paste to bottom of tag.

Select ele#21, resize to (100x68). Copy and paste to bottom right side of tag by shoes.

Select ele#28, no need to resize. Copy and paste to bottom of tag.

Select ele#32, resize to (100x100). Copy and paste twice. Once to upper left side of tag and again to upper right side of tag.

Select ele#49, resize to (100x126) Copy and paste in front of rose vase.

Select ele#46, resize to (100x77). Copy and paste on right side of purse.

Select ele#39, resize to (200x172). Copy and paste to far right side of tag.

Select ele#38, resize to (200x260). Copy and paste to far left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



PTU Tutorial - Garvey Love

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in February 10, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called Jolie from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2012/02/shabby-chic.htmlThanks Deanna

Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Improver

 Let's begin shall we.

Open a new image,  600x600.

I used paper03. Apply my mask#79. Merge mask layer visible.

Select frame03, resize to (400x472) Copy and paste to center of tag. Add a drop shadow.

Select paper01, resize to (400x400), Copy and paste behind frame. Erase any excess you do not need.

Select bow02, resize to (200x266) Copy and paste to upper left side of frame.

Select Love02, resize to (200x200). Copy and paste to upper right side of frame.

Select tube, resizing will vary. Copy and paste behind frame. Erase part of the frame to make it look like she is coming out of frame.

Select frame01, resize to (400x271) Copy and paste to bottom of frame. Add a drop shadow.

Select paper03, resize to (200x200) Copy and paste 3 time to the backgrounds for each frame. Erase any excess you do not need.

Select 3 different tubes by the same artist. Resize them to fit each frame. Erase any excess you do not need.

Select leaves03, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.

Select leaves01, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.

Select pillow02, resize to (200x200) Copy and paste behind bottom frame on left side.

Select pillow01, resize to (200x200). Copy and paste behind frame on right side.

Select different ribbons from the kit. Resize them and place them randomly around the tag.

Select pitcher and pot, resize both to (150x150) Copy and paste them both behind frame01 on right side of tag.

Select shabby flowers 01 and 02, resize both to (150x131). Copy and paste both of them behind frame01 on left side of tag.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Improver. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



PTU Kit - Sweet Emotions

I made this tag called Sweet Emotions using a PTU kit by Ditz Bitz called Lily. You can purchase her kits here.



FTU Mask #86

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.