Signature Collections

FTU Mask #87

2012-02-16T07:28:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

The Brat Pack Blogtrain - Kick Start My Heart

2012-02-14T07:00:00.000-06:00

It's time for the latest Brat Pack Blogtrain. It's called Love Letters. This is my contribution. Click the Frame Cluster above to bring up correct size. Then right click and save to your computer.

Now hop on board the train and visit some of the other stations.

Stina ::designs by stina::

Tootypup: Tootypup Scraps

Anita: Daydreamers

Carrie: Skinnis Stats and Scraps

Chris: DCCreations

Em: EmJay Scraps

Holly: Freeks Creations

Jen: Jens Sweet Temptations

Ketty: Charlieonline.it

Miriam: Ellanoir

Paula: Craftypoly

Pink: Pink's Poetic Scraps

Stu: CreativeCrazyScraps

Suzy: SuzyQ Designs

PTU Tutorial - Don't Love Me

2012-02-13T16:20:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on February 13, 2012.

This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tube of your choice. I used the art of Ismael Rac. You must have a license to use his art which you can get here: http://store.xeracx.net

PTU Scrapkit called Don’t Love Me by NaughtyAngelzCreationz. You can find this kit herehttp://naughtys-creations.blogspot.com

Thanks NaughtyAngel

Mask of choice. I used my mask#18 and #70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Use paper#09. Apply my mask #70. Merge mask layer visible.

I used paper#09. Apply my mask#18. Merge mask layer visible. Copy and paste on top of mask#70.

Select el#15, resize to (300x150). Copy and paste to lower right side.

Select el#2, resize to (550x207). Copy and paste to bottom of tag.

Select frame#2, resize to (400x400). Copy and paste to upper center of tag, Add a drop shadow.

Select paper#09, resize to (400x400). Copy and paste behind frame. Erase any excess you will not need.

Select tube, resizing will vary. Copy and paste behind frame. Erase any excess you do not need of frame and tube. We want the tube too look like it is coming out of the frame.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Little Ballerina

2012-02-13T10:19:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on February 13, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

PTU Scrapkit called Ballerina Girl by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 86, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#14. Apply my mask#86. Merge mask layer visible.

Select ele#26, no need to resize. Copy and paste on to mask.

Select ele#30, no need to resize. Copy and paste on tag.

Select ele#29, no need to resize. Copy and paste on tag.

Select ele#42, no need to resize. Copy and paste to center of tag.

Select pap#14, resize to (500x500). Copy and paste behind ele#42. Erase any excess you do not need.

Select ele#37, no need to resize. Copy and paste in front of frame.

Select ele#45, resize to (300x182). Copy and paste twice once to bottom left side of tag and the other to bottom right side of tag.

Select ele#47, resize to (100x234). Copy and paste to bottom right side of tag.

Select ele#24, resize to (500x349). Copy and paste to bottom of tag.

Select ele#36, resize to (150x79). Copy and paste to bottom center of tag.

Select ele#22, resize to (100x210) Copy and paste to bottom left side by end of frame.

Select ele#17, no need to resize. Copy and paste to bottom of tag.

Select ele#21, resize to (100x68). Copy and paste to bottom right side of tag by shoes.

Select ele#28, no need to resize. Copy and paste to bottom of tag.

Select ele#32, resize to (100x100). Copy and paste twice. Once to upper left side of tag and again to upper right side of tag.

Select ele#49, resize to (100x126) Copy and paste in front of rose vase.

Select ele#46, resize to (100x77). Copy and paste on right side of purse.

Select ele#39, resize to (200x172). Copy and paste to far right side of tag.

Select ele#38, resize to (200x260). Copy and paste to far left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Garvey Love

2012-02-10T08:01:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in February 10, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called Jolie from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2012/02/shabby-chic.htmlThanks Deanna

Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Improver

Let's begin shall we.

Open a new image, 600x600.

I used paper03. Apply my mask#79. Merge mask layer visible.

Select frame03, resize to (400x472) Copy and paste to center of tag. Add a drop shadow.

Select paper01, resize to (400x400), Copy and paste behind frame. Erase any excess you do not need.

Select bow02, resize to (200x266) Copy and paste to upper left side of frame.

Select Love02, resize to (200x200). Copy and paste to upper right side of frame.

Select tube, resizing will vary. Copy and paste behind frame. Erase part of the frame to make it look like she is coming out of frame.

Select frame01, resize to (400x271) Copy and paste to bottom of frame. Add a drop shadow.

Select paper03, resize to (200x200) Copy and paste 3 time to the backgrounds for each frame. Erase any excess you do not need.

Select 3 different tubes by the same artist. Resize them to fit each frame. Erase any excess you do not need.

Select leaves03, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.

Select leaves01, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.

Select pillow02, resize to (200x200) Copy and paste behind bottom frame on left side.

Select pillow01, resize to (200x200). Copy and paste behind frame on right side.

Select different ribbons from the kit. Resize them and place them randomly around the tag.

Select pitcher and pot, resize both to (150x150) Copy and paste them both behind frame01 on right side of tag.

Select shabby flowers 01 and 02, resize both to (150x131). Copy and paste both of them behind frame01 on left side of tag.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Improver. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Kit - Sweet Emotions

2012-02-08T08:04:00.000-06:00

I made this tag called Sweet Emotions using a PTU kit by Ditz Bitz called Lily. You can purchase her kits here.

FTU Mask #86

2012-02-08T06:32:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Tutorial - Punkish Queen

2012-01-30T13:59:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on January 30, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/

FTU Scrapkit called Roller Punks by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#01. Apply my mask#74. Merge mask layer visible.

Select frame#10, resize to (500x500). Copy and paste to mask.

Select paper#19, Resize to (400x400). Copy and paste behind frame. Erase any excess you do not need.

Select tube, resizing will vary. Copy and paste behind frame. Erase part of frame to make it look like tube is coming out of frame.

Select dangle01, resize to (200x380). Copy and paste to right side of frame on corner.

Select bow11, resize to (300x200). Copy and paste at bottom of frame.

Select cap2, resize to (200x200). Copy and paste to right side of tag on corner of frame.

Select skates02, resize to (200x212). Copy and paste to left side of tag.

Select teddy01, resize to (200x200). Copy and paste to left side of tag in front of skates.

Select bottle01, resize to (200x200). Copy and paste to bottom right side of tag.

Select bottle02, resize to (200x200). Copy and paste in front of bottle01.

Select flower03 and 04, resize to (100x100). Copy and paste randomly around the tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - It's A Crime

2012-01-30T11:26:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on January 30, 2012.

This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tube of your choice. I used Victoria Raber Tube art.

PTU Scrapkit called Sexy Biker Babes by NaughtyAngelzCreationz. You can find this kit here: http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com

Mask of choice. I used my mask#75, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#10. Apply my mask#75. Merge mask layer visible.

Select el#40, no need to resize. Copy and paste to upper center of mask.

Select fr3, resize to (500x400). Copy and paste to lower center of tag.

Select tube, resizing will vary. Copy and paste behind frame. Erase any excess of frame you do not need to make it appear that tube is coming out of the frame. Add drop shadow.

Select pp#3, resize to (400x400). Copy and paste behind frame and tube. Erase any excess you do not need.

Merge tube, frame and paper together. Add a drop shadow.

Select el#39, no need to resize. Copy and paste to bottom right side of tag. Add a drop shadow.

Merge together with frame.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Select el#24, resize to (200x99). Copy and paste to upper left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Snag A Tag

2012-01-17T08:09:00.001-06:00

Here are some snags for you. Just click on the image to bring up the larger size. The right click and save to your computer. Please so not re-size, alter or claim these snags as your own creation! Leave some love.

PTU Tutorial - Miss Purrr-fect

2012-01-16T12:36:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in January 16, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of Barbara Jensen. You must have a license to use her art which you can get here: http://www.eroticartistgallery.com/

PTU Scrapkit called Jolie from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2012/01/new-ptu-kit-jolie.htmlThanks Deanna

Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Bad Dream

Let's begin shall we.

Open a new image, 600x600.

I used paper2. Apply my mask#79. Merge mask layer visible.

Select circles, resize to (500x357). Copy and paste twice, one to upper right side of tag and again to lower left side of tag.

Select beads, resize to (500x125). Copy and paste to bottom of tag.

Select frame01, resize to (600x438). Copy and paste to center of tag. Add a drop shadow.

Select tube, resizing will vary. Copy and paste behind frame. Erase any excess you do not need.

Select wingedheart, resize to (300x133). Copy and paste above the frame.

Select pin2, no need to resize. Copy and paste as if the pin is going through the heart.

Select flowers, resize to (300x167). Copy and paste twice, once to upper left side of tag and the other to lower right side of tag.

Select tube again, sizing will vary. Copy and paste full size tube to left corner of tag. Add drop shadow.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Vintage Beauty

2012-01-16T10:40:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in January 16, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tube by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called Vintage Girls from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 84, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Improver

Let's begin shall we.

Open a new image, 600x600.

I used paper#19. Apply my mask#84. Merge mask layer visible.

Select frame04, resize to (500x500). Copy and paste to center of tag. Add drop shadow.

Select background3, no need to resize. Copy and paste behind frame04.

Select fan, no need to resize. Copy and paste on top of background3 behind frame04.

Select corner, no need to resize. Copy and paste to left side of tag. Select again this time mirror image and paste to right side of tag.

Select tube, resizing will vary. Copy and place behind frame04. Erase any excess you do not need.

Select bottle, resize to (150x262). Copy and paste to bottom right side of tag.

Select bow1, resize to (500x265) Copy and paste to bottom right side of tag.

Select candle, no need to resize. Copy and paste to bottom left side of tag.

Select bag2, resize to (200x110). Copy and paste to bottom of candle.

Select brooch, resize to (100x82). Copy and paste to right side of bag2.

Select leaves, resize to (300x156). Copy and paste twice, one to bottom right side of tag and another to the bottom left side of tag.

Select envelopes, resize to (200x136). Copy and paste to bottom middle right of tag.

Select flower1, resize to (200x151). Copy and paste to right bottom of tag. Select again this time mirror image and copy, paste to left bottom of tag.

Select keys, resize to (100x75). Copy and paste at bottom center of tag.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Improver. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

The Brat Pack Blogtrain - Love Letters

2012-01-14T23:59:00.004-06:00

It's time for the latest Brat Pack Blogtrain. It's called Love Letters. This is my contribution. Click the Frame Cluster above to bring up correct size. Then right click and save to your computer.

Now hop on board the train and visit some of the other stations.

Stina ::designs by stina::

Tootypup: Tootypup Scraps

Anita: Daydreamers

Carrie: Skinnis Stats and Scraps

Crystal: Crystal's Creations

Holly: Freeks Creations

Jen: Jens Sweet Temptations

Jill: Created by Jill

Ketty: Charlieonline.it

Lindsay: Lindsay's Ramblings

Miriam: Ellanoir

Pink: Pink's Poetic Scraps

Stu: CreativeCrazyScraps

Tracey: Tracey's Tags and Treasures

PTU Kit - Bad and Worse

2012-01-13T08:05:00.000-06:00

I made this tag using Ditz Bitz PTU Kit called Midnight. You can purchase it here.

PTU Tutorial - Timeless Beauty

2012-01-09T11:33:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written January 9, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tube of your choice. I used the art of Ismael Rac. You must have a license to use his art which you can get here: http://xeracx.net/store

PTU Scrapkit called I’m Yours from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2012/01/im-yours.html Thanks Deanna

Mask of choice. I used my mask# 85, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero - Porcelain

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper# 02. Apply my mask#85. Merge mask layer visible.

Select heartdeco, no need to resize. Copy and paste twice, once to top of tag and the other to bottom of tag.

Select frame03, resize to (600x486). Copy and paste to middle of tag. Add a drop shadow.

Select paper02, resize to (400x400). Copy and paste behind frame. Erase any excess you do not need.

Select tube, resizing will vary. Copy and paste behind frame. Erase any excess frame to do not need to expose tube.

Select bow01, resize to (100x123). Copy and paste to upper left side of frame.

Select charm01, resize to (100x123). Copy and paste on top of bow01. Erase and excess you do not need to make it look like the charm is attached to the bow.

Select ribbon02, resize to (400x238). Copy and paste to right side of tag. Select again and mirror copy. Copy and paste to left side of tag.

Select tag01, resize to (200x120). Copy and paste to bottom center of tag.

Select beads, resize to (200x259). Copy and paste three times. Place them across the bottom of tag.

Select roses, resize to (200x197). Copy and paste to right side of tag.

Select rose01 and 02, resize both to (100x84). Copy and paste both toward middle right side of tag slightly behind roses.

Select bottles, resize to (200x236). Copy and paste to left side of tag.

Select petals, resize to (200x83). Copy and paste in front of bottles.

Select glass02, resize to (99x146). Copy and paste on top of petals.

Select shoes01, resize to (150x128). Copy and paste to the left off enter.

Select mask01, resize to (100x137). Copy and paste to far right side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Mask #85

2012-01-02T10:49:00.002-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Mask #84

2012-01-02T10:47:00.002-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Mask #83

2012-01-02T10:44:00.002-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Mask #82

2012-01-02T10:43:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Mask #81

2012-01-02T10:41:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Tutorial - To Paris With Love

2011-12-30T08:56:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on December 30, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com

FTU Scrapkit called Love in Paris by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 80, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#05. Apply my mask#80. Merge mask layer visible.

Select element#06, resize to (500x544). Copy and paste to center of tag.

Select element#48, no need to resize. Copy and paste to bottom of tag.

Select element#16, resize to (200x300). Copy and paste to upper top center of tag.

Select element#55, no need to resize. Copy and paste to middle of tag.

Select element#51, resize to (200x341). Copy and paste on top of mannequin white.

Select element#52, resize to (200x275). Copy and paste to mannequin black.

Select element#45, no need to resize. Copy and paste to upper right corner of tag.

Select again this time flip image. Copy and paste to lower left side of tag.

Select element#46, no need to resize. Copy and paste to middle right side of tag.

Select element#16, no need to resize. Copy and paste to bottom center of tag.

Select tube, sizing will vary. Copy and paste on top of element#16.

Select element#21, resize to (100x178). Copy and paste to lower right side of tag.

Select element#50, resize to (100x38). Copy and paste to bottom of tag on right side.

Select element#49, resize to (100x76). Copy and paste to bottom of tag on right side.

Select element#22, resize to (50x100). Copy and paste on couch under your tube.

Select element#47, resize to (50x50). Copy and paste above element#22.

Select element#18, resize to (100x120). Copy and paste to lower left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

PTU Tutorial - Naughty or Nice

2011-12-23T08:58:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written December 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tube by Alex Prihodko. You must have a license to use his art which you can get here: http://picsfordesign.com

PTU Scrapkit called So Christmas from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2011/11/so-christmas.html Thanks Deanna

Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Porcelain

Let's begin shall we.

Open a new image, 600x600.

I used paper#15. Apply my mask#79. Merge mask layer visible.

Select corner#2, no need to resize. Copy and paste to upper left side of mask. Select again, this time flip, then mirror. Copy and paste to bottom of right side of mask.

Select glitter, resize to (600x253). Copy and paste twice. Once to top of tag and then to bottom of tag.

Select sparkle, resize to (600x565). Copy and paste to center of tag.

Select frame#4, resize to (400x440). Copy and paste to center of tag. Add a drop shadow.

Select paper#14, resize to (400x400). Copy and paste behind the frame. Erase any excess you do not need.

Select tube, resizing will vary. I put a close up inside the frame. Then made it look like she is coming out of the frame. Erase any excess you do not need.

Select wordart#2, resize to (200x94). Copy and paste to bottom left side of tag.

Type the word or, add it to the bottom of wordart#2.

Select wordart#3, resize to (200x98). Copy and paste to bottom of your word or.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Garvey Christmas

2011-12-22T17:29:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in December 22, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tubes by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called Holly Wishes from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Select wordart#4, resize to (600x349).

Select beadscatter, resize to (600x157). Copy and paste 4 times and place them behind wordart. Spread them out to cover background.

Select your Garvey tubes. Resizing will vary depending on the tube. Copy and paste them randomly around your tag.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Winter Shivers

2011-12-22T14:42:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on December 22, 2011.

This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Dean Yeagle Tubes art. You must have a license to use his art which you can get here: http://www.cdoestore.com. You will need a full body tube with a close-up.

PTU Scrapkit called Christmas Ice by NaughtyAngelzCreationz. You can find this kit here: http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com

Mask of choice. I used my mask#80, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Porcelain

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper#2. Apply my mask# 80. Merge mask layer visible.

Select ele#23, no need to resize. Copy and paste to upper right side of mask.

Select ele#6, resize to (600x580). Copy and paste over mask.

Select ele#42, no need to resize. Copy and paste to upper right side of tag.

Select tube, resizing will vary. Copy and paste on top of horse.

Merge all layers. Resize to (400x400).

Open new image (600x600).

Select ele#36, no need to resize. Copy and paste to bottom of new image. Copy and paste tag globe you just made. Paste it on top of the globe base.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Mask #80

2011-12-12T05:33:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

FTU Mask #79

2011-12-04T08:46:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

Gothic Inspirations Blog Train - Nightmare Before Christmas

2011-11-30T23:59:00.002-06:00

It's time for the latest Gothic Inspirations Blogtrain. It's called Nightmare Before Christmas. This is my contribution. Click the picture to bring up correct size. Then right click and save to your computer.

Hop on board the train and visit some of the other stations.

HEADQUARTERS

Jo with: A Taggers Scrap

Annette with: AW Design

Jill with: Created By Jill Scraps

Stuart with: Creative Crazy Scraps

Crystal with: Crystals Creations

Dee with: Dees’Sign Depot

Sharon with: Designs by SharonB

Stina with: Designs By Stina

Dianna with: Digicats (& Dogs)

Elisa with: Digital Designs by Elisa

Conchi with: DNScraps

Miriam with: Ellanoir Design

Jessica with: Gothic Inspirations

Victoria with: Maitri Scraps

Lee with: Midnight Art

Victoria with: Signature Collections

Kara with: Sweet Cravings Scraps

The Brat Pack Blog Train - Christmas Around the World

2011-11-30T18:00:00.001-06:00

Cluster Frame by Signture Collections. To download my part, Click on image to get the correct size, then just right click and save as a png to your computer. If you download, leave some love.

Stina ::designs by stina::

Tootypup: Tootypup Scraps

Anita: Daydreamers

Cari: Black Widow Creationz

Chris: DCCreations

Crystal: Crystal's Creations

Dilcia: Disyas Digitals Designs

Elisa: Digital Designs by Elisa

Jen: Jens Sweet Temptations

Jen: Sleek N Sassy Designz

Ketty: Charlieonline.it

Laurie: Junkin Punkin

Linda: CandyWrap

Lindsay: Lindsay's Ramblings

Miriam: Ellanoir

Pink: Pink's Poetic Scraps

Tammy: TLP Designz

FTU Tutorial - Purple Passion

2011-11-28T16:43:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/

.FTU Scrapkit called Free Like A Bird by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#4. Apply my mask#74. Merge mask layer visible.

Select elem02, resize to (600x417). Copy and paste to center of tag.

Select elem17, no need to resize. Copy and paste to bottom of tag.

Select again, this time flip and paste to the top of tag.

Select elem05, resize to (600x587). Copy and paste to center of tag. Add a drop shadow.

Select elem1, resize to (300x225). Copy and paste at the top of elem05. Add a drop shadow.

Select paper03, resize to (400x400). Copy and paste behind frame. Erase any excess showing.

Select elem21, resize to (200x200). Copy and paste to lower left side of frame.

Select elem19, resize to (200x189). Copy and paste to middle right side of frame.

Select tube, resizing will vary. Copy and Paste behind frame. Erase excess frame to make it look like your tube is coming out of the frame.

Select tube again. Resizing will vary. Copy and paste another version of you tube on the right hand side of your tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Sexy Merry Christmas

2011-11-28T14:51:00.001-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Robert Alvarado Tubes art. You must have a license to use her art which you can get here http://psptubesemporium.com

PTU Scrapkit called Jolly Christmas from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Bad Dream

Let's begin shall we.

Open a new image, 600x600.

I used paper#18. Apply my mask#78. Merge mask layer visible.

Select tree2, resize to (600x600). Copy and paste on center of mask.

Select wordart, resize to (600x587). Copy and paste on top of tree.

Select tube, resizing will vary. Copy and paste it on top of Christmas. Erase portions of Christmas so the your tube appears woven into it.

Add a drop shadow to tube and wordart.

Select the different color ornaments, resize them to different sizes. Copy and paste the all around the wordart. Make sure it looks like that are hanging from the words. Add drop shadows to all the ornaments.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Erotic Christmas

2011-11-28T12:33:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Barbara Jensen Tubes art. You must have a license to use her art which you can get here http://www.eroticartistgallery.com

PTU Scrapkit called Ice Aqua Xmas from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero - Radiance

Let's begin shall we.

Open a new image, 600x600.

I used paper#7. Apply my mask#78. Merge mask layer visible.

Select glitter#2, no need to resize. Copy and paste to center of tag.

Select snowflakescatter, resize to (300x445). Copy and paste twice. Once to upper left side of tag, then to lower middle of right side of tag.

Select sparkles#5, no need to resize. Copy and paste to upper center of tag.

Select tree#3, resize to (300x570). Copy and paste to center of tag.

Select presenthanger, no need to resize. Copy and paste at top of tree. Select your eraser, erase part of the hanger to were it looks like it is hanging from the star on the tree.

Select giftboxes, resize to (200x200). Copy and paste to left side bottom of tree.

Select present#4, resize to (200x200). Copy and paste to bottom right side of tree.

Select present#1, resize to (100x100) Copy and paste in front of gift boxes on left hand side.

Select present#5, no need to resize. Copy and paste on left side behind gift boxes.

Select giftbox#3, resize to (150x150). Copy and paste to lower right side of tag.

Select snowman, no need to resize. Copy and paste to right side of tag. Place him behind some presents.

Select the bears, no need to resize. I cut out the small bear from the scrap. I then copied and pasted him on top of the giftboxes.

Select tube, resizing will vary. Copy and paste to behind present on left hand side.

Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Mask #78

2011-11-26T10:15:00.002-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

PTU Tutorial - Pinky Sweet

2011-11-16T16:07:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on November 16, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.

PTU Scrapkit called Simply Elegant by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#11. Apply my mask#73. Merge mask layer visible.

Select ele32, no need to resize. Copy and paste to center of mask.

Select ele09, no need to resize. Copy and paste on top of ele32.

Select ele01, resize to (500x500). Copy and paste to lower center of tag.

Select paper06, resize to (400x400). Copy and paste behind the frame. Erase any excess you do not need.

Select tube, resizing will vary. Copy and paste to center of tag.

Select ele08, resize to (600x171). Copy and paste to bottom of tube.

Select ele50, resize to (600x78).Copy and paste on top of ele08.

Select ele45, resize to (100x100). Copy and paste twice, once to upper left side of tag. Then another to the middle right side of tag.

Select ele39, no need to resize. Copy and paste to upper right side of tag.

Select ele35, no need to resize. Copy and paste over tube.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Material Girl

2011-11-07T16:38:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on November 7, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tube by Barbara Jensen. You must have a license to use her art which you can get here: http://www.scrapsandthecity.com

PTU Scrapkit called Breakfast At Tiffanysl from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Plus her freebie! Thanks Jo!

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Porcelain

Font of your choice.

Let's begin shall we.

Open new image 600x600.

I used paper18. Apply my mask 73. Merge mask layer visible.

Select glittersplatter2, resize to (400x549). Copy and paste to right side of tag.

Select glittersplatter, mirror image, resize to (400x459). Copy and paste to left side of tag.

Select frame1, resize to (600x580). Copy and paste to center of tag. Add a drop shadow.

Select tube, resizing will vary. Copy and paste inside of frame. Erase any excess you do not want showing.

Select wings, resizing will vary. Copy and paste behind your tube. Erase any excess you do not need.

Select bottles, resize to (200x253) Copy and paste to bottom left side of tag.

Select beads4, no need to resize. Copy and paste at bottom center of tag.

Select violin. No need to resize. Copy and paste to lower right side of tag.

Select hatbox, resize to (150x150). Copy and paste to lower right side of tag on top of violin.

Select ring holder, no need to resize. Copy and paste to lower left side of tag on top of bottles.

Select shoes3, resize to (150x154). Copy and paste to lower left side of tag on top of bottles, and ring holder.

Select box4, resize to (150x173). Copy and paste slightly behind hatbox.

Select box2, resize to (150x157). Copy and paste to lower right side of tag behind hat box.

Select box3, resize to (150x210). Copy and paste behind shoes on left side.

Select purse2, resize to (150x118). Copy and paste to left side of tag.

Select ring, resize to (100x133). Copy and paste at bottom center of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain

. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Sexy Pilgrim

2011-11-07T13:32:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on November 7, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.

PTU Scrapkit called Autumn Love by NaughtyAngelzCreationz. You can find this kit here: http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com

Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper#10. Apply my mask#77. Merge mask layer visible.

Select ele8, resize to (400x422). Copy and paste twice. Once to upper left side of tag and the other to the upper right side of tag.

Select frame2, resize to (400x400). Copy and paste to center of tag.

Select paper5, resize to (350x350). Copy and paste behind frame. Erase any excess you do not want showing.

Select ele19, resize to (400x258). Copy and paste behind frame and paper on bottom left side of tag. Select again, this time mirror image and place behind paper and frame on bottom right side.

Select tube, resizing will vary. Copy and paste in to frame. Erase any excess you do not want showing.

Make a circle text. I used paper4. Write “Want to help me stuff the turkey?” Add a drop shadow.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Kit - Elegant Steam

2011-11-07T10:47:00.000-06:00

I am using a PTU Kit called Elegant Steam by Ditz Bitz. You can purchase it here.

FTU Gemeinschaftskit the Friends of Bastelcity Kit

2011-11-07T08:43:00.000-06:00

Six designers create a kit
and these designers were there
AngelasDreamz
Anita
FantasyDreamzDesignz
Schnuppe
Bärbel
Maryann63

I am using Fantasy Dreamz Designz portion of this amazing kit. You can find it here. If you download, leave her some love.

PTU Tutorial - Breaking Dawn

2011-11-06T15:35:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written November 6, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tubes by Zindy S. D. Nielsen. You can find her art here: http://zindy-zone.dk

PTU Scrapkit called On the Veranda by Butterfly Kisses Scraps. You can find this kit here: http://bkscraps.blogspot.com/2011/10/on-veranda.html Thanks Deanna!

I used my FTU Template called Twilight, which you can get http://mistressv-signaturecollections.blogspot.com/

Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open template, select your papers to fill your template. Deselect background. I have selected the following. Paper 10 for top and bottom rectangle. Paper 6 for circle text with drop shadow. Paper 6 for black rectangle.

Open a new layer, 600x600. Select paper 4. Apply to my mask#77. Merge mask layer visible. Copy and paste behind template.

Select spill1, resize to (600x260). Copy and paste behind moon.

Select spill02, no need to resize. Copy and paste twice, once at upper right side of tag behind the moon. Then the other at the lower left side behind the moon.

Select frame4, resize to (500x306). Copy and paste over the moon. Add a drop shadow.

Select paper2, resize to (300x300). Copy and paste behind frame4 under big circle. Erase excess that you do not need.

Select paper10, resize to (300x300). Copy and paste behind frame4 under the little circle. Erase excess that you do not need.

Select your tubes, resizing will vary. Place them in side the frame.

Select flowerswirl, resize to (400x176). Copy and paste twice. One on top of frame and one below frame.

Select swirl2, resize to (600x213). Copy and paste behind moon and circle text in center.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

PTU Tutorial - Woodland Fairy

2011-11-06T13:17:00.000-06:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on November 6, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used art by Fantasy Art by Denise Pauline You can purchase her art here: http://swtmelode.com

PTU Scrapkit called Woodland Harmony from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Bad Dream

Let's begin shall we.

Open a new image, 600x600.

I used paper#9. Apply my mask#77. Merge mask layer visible.

Select decor1, resize to (600x597). Copy and paste to mask.

Select leafscatter2, no need to resize. Copy and paste to upper right side of tag. Reselect, mirror, copy and paste to left lower side of tag.

Select floatingblooms, resize to (600x600). Copy and paste to right side of tag. Reselect, mirror, copy and paste to left side of tag.

Select lantern, no need to resize. Mirror, copy and paste to left side of tag.

Select sunlight, no need to resize. Copy and paste on top of glass on lantern.

Select your tube, sizing will vary. Copy and paste to lower center of tag.

Select leaves2, no need to resize. Copy and paste to bottom of your tube.

Select glasspepples, resize to (600x295). Copy and paste to bottom of tag.

Select mushroom2, reside to (100x167). Copy and past to right side of tube. Reselect, mirror, copy and paste to left side of tube.

Select wateringcan, resize to (200x148). Copy and paste to lower left side of tag.

Select fungi, no need to resize. Copy and paste to lower right side of tag.

Select flowers3, resize to (200x200). Copy and paste at bottom center of tag. Reselect, resize to (100x100). Copy and paste to bottom left of tag and bottom right of tag.

Select fox, resize to (200x240). Copy and paste to bottom left side of tag.

Select chipmunk, resize to (100x100). Copy and paste to bottom right side of tag.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

FTU Mask 77

2011-11-06T08:56:00.000-06:00

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

PTU Tutorial - Secrets Of Autumn

2011-10-28T09:31:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on October 28th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Jay Trembly tube art. You must have a license to use his art which you can get purchase: http://www.scrapsandthecity.com

PTU Scrapkit called Emo Autumn by NaughtyAngelzCreationz. You can find this kit here: http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com

Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper#4. Apply my mask#70. Merge mask layer visible.

Select ele#49, no need to resize. Copy and paste to upper right side of tag. Re-select mirror image and copy and paste to upper left side of tag.

Select ele#1, no need to resize. You are going to make a frame out of these flowers. Keep rotating to the right until you make a frame. Copy and paste each piece to the center of the tag.

Select your tube, resizing will vary. Copy and paste behind the flower frame. Erase any unwanted exposure. You want it to look like your tube is coming out of the frame.

Select ele#7, no need to resize. Copy and paste at bottom of your flower frame in center.

Select ele#48, resize to (200x129). Copy and paste 3 times. One to the bottom left side of tag, one in center at the bottom and one to the right bottom side.

Select ele#5, resize to (200x128) Copy and paste to lower left side of tag on top of leaves. Reselect, mirror image and copy and paste to lower right side of tag on top of leaves.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

♥BEAUTI~LICIOUS AWARD♥

2011-10-15T10:23:00.000-05:00

BEAUTI♥LICIOUS AWARD!

This award is for the Beautiful Women (and Men)

who grace us with their talents

in the Tagger Community.

The intent of this award is to pass it on

to the Designer, Tagger, or Artist

who has inspired you with their endless talent

and who has touched your heart.

There are many out there.

Let's see how far we can pass this on.

Once you have received this award

Please pass it on to five blogs

to show some love

for those who truly are BEAUTIFUL.

*I just got this award*
♥Thank you, Savage♥
I choose to pass it to:

*Sarah Tags N Things*

*Stef's Scrapkits CT Blog*
*Fantasy Dreams Designsz*
*Sweet Addictionz*
*PinkParadox Productions*

Brat Pack Blog Train - Twilight - Forever is Only the Beginning

2011-10-14T18:00:00.005-05:00

You can download my part here.

Stina ::designs by stina::

Tootypup: Tootypup Scraps

Cari: Black Widow Creationz

Chris: DCCreations

Crystal: Crystal's Creations

Elisa: Digital Designs by Elisa

Jen: Jens Sweet Temptations

Jen: Sleek N Sassy Designz

Ketty: Charlieonline.it

Lindsay: Lindsay's Ramblings

Mandi: Creating with Fae

Miriam: Ellanoir

Pink: Pink's Poetic Scraps

Victoria: Signature Collections

FTU Kit - Ice Cold Steampunk

2011-10-05T07:29:00.000-05:00

I made this tag using Ditz Bitz part of the Heartbeatz Creationz's blog train

You can find this and other goodies by visiting her site here.

PTU Tutorial - Weegie

2011-10-03T18:45:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Ted Hammond tube art. You must have a license to use his art which you can get purchase: http://www.cdoestore.com/

PTU Scrapkit called Lil Witchy Poo by NaughtyAngelzCreationz. You can find this kit here: http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com

Mask of choice. I used my mask# 62, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero - Porcelain

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper#9. Apply my mask#62. Merge mask layer visible.

Select ele32, no need to resize. Copy and paste to mask at the top.

Select ele9, resize to (600x144). Copy and paste at top of tag.

Select ele33, no need to resize. Copy and paste twice. Once to lower left side of tag and one to lower right side of tag.

Select ele31, resize to (400x309). Copy and paste to center bottom of tag.

Select tube. Resizing will vary. Copy and paste to bottom of tag. Erase excess of tube. Make it look like she is coming out of the board.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

FTU Tutorial - Boo!

2011-10-03T16:13:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

FTU Scrapkit called A Spooky World. by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 76, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used pp04. Apply my mask#76. Merge mask layer visible.

Select ele#13, resize to (500x500). Copy and paste to left side of tag. Reselect, mirror and copy and paste to right side of tag.

Select ele27, resize to (200x275). Copy and paste to lower left side of tag.

Select ele26, resize to (200x344). Copy and paste to lower sent of tag.

Select ele25, resize to (200x295). Copy and paste to lower right side of tag.

Select ele29, resize to (600x295). Copy and paste at top of tag.

Select ele30, resize to (200x74). Copy and paste below ele29.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

PTU Tutorial - Color My World

2011-10-03T14:43:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tube by Robert Alvarado. You must have a license to use his art which you can get here: http://psptubesemporium.com

PTU Scrapkit called Colors of Joy from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2011/04/colors-of-joy.htmlThanks Deanna

Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero – Bad Dream

Let's begin shall we.

Open a new image, 600x600.

I used paper#10. Apply my mask#70. Merge mask layer visible.

Select circle02, resize to (300x279). Copy and paste to upper left side of tag. Add a drop shadow.

Select circles01, resize to (300x279). Copy and paste to lower right side of tag. Add a drop shadow.

Select ribbon01, resize to (300x364). Copy and paste twice, once to upper right side of tag and the next to the lower left side of tag. Add a drop shadow to both.

Add a circle text using paper10. Write “Color my world”. Add a drop shadow.

Select hearts, no need to resize. Copy and paste to middle towards the bottom of tag. Add a drop shadow.

Select paper06, resize to (300x300). Copy and paste behind pink heart. Erase any excess you do not need.

Select paper05, resize to (225x225). Copy and paste behind yellow heart. Erase any excess you do not need.

Select tube, resizing will vary. Copy and paste between paper and hearts. Erase to expose your tube, leaving the yellow heart in tact.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

Pussycat

2011-09-30T07:15:00.000-05:00

I made this tag using Fantasy Dreams Designzs PTU Kit called Pussycat. You can find her kit here. If you download, leave her some love.

PTU Tutorial - Colors Of Fall

2011-09-26T17:14:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written on September 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

I am using a beautiful tubes by Ismael Rac. You must have a license to use his art which you can get here: http://store.xeracx.net/

PTU Scrapkit called Think Fall from A Taggers Scrap. You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Plug-ins Xero - Porcelain

Let's begin shall we.

Open a new image, 600x600.

I used paper#16. Apply my mask#73. Merge mask layer visible.

Select scatter2, resize to (600x575). Copy and paste at upper right side of mask.

Select tree, no need to resize. Copy and paste to upper left side of tag. Re-select, mirror image and copy and paste to upper right side of tag.

Select window, resize to (400x492). Copy and paste to center of tag. Add a drop shadow.

Select paper1a. resize to (400x400). Copy and paste behind window. Erase any excess you do not need.

Select flower9, resize to (200x190). Copy and paste to upper left side of window.

Select gem, resize to (50x50). Copy and paste to center of bow (flower9).

Select tube, resizing will vary. I copied and pasted mine just to the left side of window. Add a drop shadow.

Select mushroom1, resize to (100x150). Copy and paste twice, one to lower far left side of tag and one on the right.

Select greenery, resize to (300x164). Copy and paste to bottom left side of tag. Reselect, mirror and copy to bottom right side of tag.

Select floral 3, resize to (200x151). Copy and paste to bottom left side of tag. Reselect, mirror and copy and paste to bottom right side of tag.

Select floral 4, resize to (200x95). Copy and paste to bottom left side of tag. Reselect, and copy to bottom right side of tag.

Select scatter1a, resize to (600x220). Copy and paste to bottom of tag.

Select pumpkindecor, resize to (300x216). Copy and paste on top of greenery on the left side. Reselect, mirror and paste on top of greenery on the right side.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

Brat Pack Blog Train - Witches And Britches

2011-09-14T18:00:00.011-05:00

The Brat Pack Blog Train has left the station

There are loads of fab freebies to collect

Stina ::designs by stina::

Tootypup: Tootypup Scraps

Anita: Daydreamers

Carmen: Doodling Divas

Dawn: Sunshine Daze

Elisa: Digital Designs by Elisa

Jen: Jens Sweet Temptations

Jenny: Jenny's Designz

Jeremy: Tagging with Base

Ketty: Charlieonline

Lei: Brattitude Scraps

Linda: CandyWrap

Loretta: Loretta B (site is in Italian - you will need a translator)

Mandi: Creating with Fae

Pink: Pink's Poetic Scraps

SueEllen: Wicked Creationz Scraps

Tammy: TLP Designz

Victoria: Signature Collections

Wy: Designs by LK

So jump aboard!

Cluster Frame by Signture Collections. To download my part, Click on image to get the correct size, then just right click and save as a png to your computer. If you download, leave some love.

Sweet and Innocent

2011-09-13T07:16:00.000-05:00

This tag was made by me using Fantasy Dreams Designzs FTU Kit called Mica. You can find it here. If you download, leave her some love for all her hard work.

PTU Tutorial - Best Friends

2011-09-12T16:55:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of Gorjuss Art. You must have a license to use her art which you can get here: http://www.gorjussarthome.com/store/

PTU Scrapkit called Best Friends Forever from Butterfly Kisses Scraps You can find this kit here: http://bkscraps.blogspot.com/2011/09/best-friends-forever.html Thanks Deanna

Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Plug-ins Xero – Bad Dream

Font of your choice.

Let's begin shall we.

Open new image 600x600.

Select paper# 14. Apply my mask#73. Merge mask layer visible.

Select beads, no need to resize, copy and paste on top of mask.

Select heartsprays, no need to resize. Copy and paste on top of beads twice. One on left hand side and one on right hand side.

Select butterflies, no need to resize. Copy and paste on top of heartsprays.

Select sparkles, resize to (500x595) Copy and paste in center of tag.

Select stringhearts, no need to resize. Copy and paste on top in center. Add a drop shadow.

Select paper#04, resize to (250x250). Copy and paste behind heart on left hand side. Erase any excess you do not need.

Select paper# 01, resize to (250x250). Copy and paste behind heart on right hand side. Erase any excess you do not need.

Select tubes, resizing will vary. Copy and paste inside of hearts. Erase any excess you do not need.

Select wordart, no need to resize. Copy and paste to middle of tag towards the bottom. Add a drop shadow.

Add name, url, copywrite and watermark.

Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

PTU Tutorial - Trick or Treat

2011-09-12T14:17:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

PTU Scrapkit called Halloween Time Collab. by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 75, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#08. Apply my mask#75. Merge mask layer visible.

Select ele#22, resize to (500x500). Copy and paste on top of mask at bottom.

Select ele#40, resize to (150x408) Copy and paste to bottom left side of tag.

Select ele#39, resize to (300x388) Cope and paste behind fence on right hand side.

Select ele#45, resize to (300x266). Copy and paste to lower right side of tag.

Select ele#41, resize to (200x295) Copy and paste to lower left side of tag.

Select ele#46, resize to (300x260). Copy and paste to lower center of tag.

Select ele#34, resize to (50x50) Duplicate several time and paste it randomly around tag behind mask.

Select ele#31, , resize to (50x50) Duplicate several time and paste it randomly around tag behind mask.

Select ele#50, resize to (500x173) Copy and paste on top of moon.

Add name, url, copywrite and watermark.

Merge all layers.

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

PTU Tutorial - Happy Birthday Princess

2011-09-12T08:26:00.000-05:00

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on September 12th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used PinUp Tubes art. You must have a license to use their art which you can get here: http://www.cdoestore.com

PTU Scrapkit called Birthday Bash Collab. by Stefs Scrapkits. You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

Let's begin shall we.

Open a new image, 600x600.

I used paper#11. Apply my mask#70. Merge mask layer visible.

Select ele#59, resize to (200x300). Copy and paste to right side of mask up on the hill. Reselect, mirror and place on left side of tag on top of hill.

Select ele#60, resize to (100x217). Copy and paste in center on top of hill.

Select ele#50, resize to (200x131). Copy and paste twice. One to upper right side of tag and one to upper left side of tag.

Select ele#24, resize to (450x97). Copy and paste like a banner hanging off of the castles.

Select ele#52, resize to (600x600). Copy and paste to upper portion of tag.

Select ele#10, resize to (600x379). Copy and paste at bottom of tag.

Select tube, resizing will vary. Copy and paste on top of grass.

Select ele#19, resize to (200x353). Copy and paste behind tube to make it look like she is holding the balloons.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

FTU Template - Bewitched

2011-09-12T06:39:00.002-05:00

Template by Signature Collections, Download here. If you download, leave some love.

I made this template for
The BNB Blog Train
but due to health problems of the train mistress
the train could not leave its station,
so with a group of partecipating
we have decided to publish the same our kits

Here is the list:

Carmen

Chantal

Charlieonline

Ellanoir

Loretta B.

Mandi D

Pink's Poetic Scraps

Signature Collections by Victoria

FTU Template - Immortal

2011-09-10T16:13:00.000-05:00

Click here to download. If you download, leave some love.