The Brat Pack Blog Train

Pages

Friday, June 3, 2011

PTU Tutorial - Deadly Love

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in June 3, 2011, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Lady Mishka. You must have a license to use her art which you can get here: http://www.scrapsandthecity.com/
PTU Scrapkit called Deadly Love by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used Vix mask#431 , which you can get here: http://www.freewebs.com/vixpsp/masks.htm.
Plug-ins Xero - Porcelain
Font of your choice.
Let's begin shall we.
Open new image as 600x600.
I used paper dl-pp1. Apply Vix mask#431. Merge mask layer visible.
Select dl-el11, no need to resize. Just copy and paste to upper left side of tag. Select again, this time mirror and copy and paste to upper right side of tag.
Select dl-frame5, resize to (500x330). Copy and paste to center of tag. Add a drop shadow.
Select dl-paper9, resize to (400x400) Copy and paste behind frame. Erase any excess paper that is not needed.
Select tube, resizing will vary depending on the tube. I resized mine at (400x400). Copy and paste tube behind frame. Erase part of the frame to make it look like the tube is coming out of the frame. Erase any excess that you do not need.
Select dl-el38, resize to (200x285). Copy and paste to lower left side of tag.
Select dl-el39, resize to (200x260) Copy and paste to lower right side of tag.
Select dl-el1, resize to (400x271) Copy and paste in front of frame.
Select dl-el15, resize to (400x142) Copy and paste behind on left side of dl-el1. Select again, this time mirror and place behind on right side of dl-el1.
I was able to select dl-el37, I resized it to (100x119). I copied and pasted it on the ponytails of my tube.
Merge all layers.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
**Scrapbook Page**
Open a new image (800x800).
Select dl-pp4, resize to (800x800). Copy and paste to new image.
Select finished tag, resize to (600x600). Copy and paste to center of paper.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Go to image, add a border. Select the size 15 for all, pick the same color red for your border color. Select your magic wand and click on our border. Go to effect, 3d effect, inner bevel. Select none.
Resize to (800x800)
Save as a jpeg.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria
 

PTU Tutorial - Steampunked Sweetheart

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in June 3, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Myka Jelina. You must have a license to use her art which you can get here: http://mykasgraphics.bigcartel.com/ . You will want to select a tube with a close up and a profile.
FTU Scrapkit called Steampunk in Aqua from Ditz Bitz.  You can find this kit here: http://ditzbitz.weebly.com/index.html Thanks Brenda. Now Brenda’s kit is a full size Scrapbooking kit. I am going to resize to tagger size. I will show it as a tag, and a scrapbooking page when finished.
Mask of choice. I used Vix mask362 , which you can get here: http://www.freewebs.com/vixpsp/masks.htm.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open new image as 600x600.
I used paper ditz_alkfo. Apply Vix mask#362. Merge mask layer visible.
Select ditz_aquatgs-2b, resize to (525x575). Copy and paste, behind finished mask.
Select ditz_897bi8nh, resize to (300x301). Place at upper left side of frame. Select again, and copy to lower right side of frame.
Select ditz_SPfowr9d, resize to (200x204). Copy and paste to upper left side of tag just below the gear you just placed. Select again, do the same to the lower right side of tag.
Select dizt_2ak1673, resize to (400x369). Copy and paste to center of tag. Add a drop shadow.
Select ditz_ajk079, resize to (400x400). Copy and paste behind the frame. Erase any excess paper you do not want.
Select your tube close up. Sizing will vary depending on your tube. I resized mine to (400x400) I did erase any excess that was showing. Add a drop shadow.
Select dizt_SPmisc1c, rotate right,  resize to (300x139). Copy and paste to upper right side of frame.
Select ditz_SPbowz1, resize to (200x143). Copy and paste to upper right side of frame, over key.
Select your profile tube. Sizing will vary depending on your tube. I resized mine to (600x600). Copy and paste to the left side of your tag.
Merge all layers.
Add a drop shadow.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
**Scrapbook Page**
Open a new image (800x800).
Select dizt_78512uio2689, resize to (800x800). Copy and paste to new image.
Select finished tag, resize to (700x700). Copy and paste to center of paper.
Merge all layers.
Save as a jpeg.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Wednesday, June 1, 2011

I Got Another Award!

This Award came from

The Blog Gurlz

Savage from Redneck Tuts by Savage
passed this award onto me.
Thank you Savage!!





This award is to acknowledge blogz that rock.

If you know a blog that rocks and want to give them this award

then send them a message saying... "Your Blog Rocks"

Since I have accepted this award from TBG I must pass it onto

5 other people that I think their blogz rock.

There are no rules to this award

only that you send it to 5 people that you think deserve this award.

Make sure you leave them a message.

The 5 blogz I picked are listed below.....

Naughty's Creationz

The Twins

Cullen-ary Delights

PolkaDot Scraps

Bright's Kreationz

Monday, May 30, 2011

PTU Tutorial - Love Is

.
This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 30, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Pick your tube that has a closed up and a profile. I am using the beautiful tubes by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called Magical Love by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Plug-ins Xero - Radiance
Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select ele#14, no need to resize. Copy and paste to upper left side of tag. Select again and mirror. Copy and paste to lower right side of tag.
Select frame#3, resize to (600x503). Copy and paste to center of tag.
Select paper#2, resize to (300x300). Copy and paste behind frame. Then erase any excess of paper sticking out.
Select tube, chose the close up shot. Resize to fit into your frame. Sizing will vary depending on your tube.
Once tube is in the frame, opacity it to 69%.
Select your full profile tube. Resize to fit on right hand side of tag. Resize will vary depending on your tube.
Select ele#42, resize to (300x221). Copy and paste on top of your frame. Add a drop shadow.
Merge all layers.
Add name, url, copywrite and watermark.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Then add, drop shadow.
Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria
 
Resize, to the size you want your finished tag to be.

Thursday, May 26, 2011

PTU Tutorial - Mother Nature

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Barbara Jensen. You must have a license to use her art which you can get here: http://www.eroticartistgallery.com/
PTU Scrapkit called Earthly Body by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
I used Mask #209 by weescotslass, which you can get http://weescotslasscreations.blogspot.com/
Plug-ins Xero - Radiance
Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select paper#3, resize to (600x600). Copy and paste to your new image.
Select grass, resize to (700x273). Copy and paste to bottom of paper#3.
Select your tube to make it look like the tube is coming out of the water into the grass. I resized mine to (300x399).
Select pebbles, resize to (300x80). Copy and paste to left side of grass. Duplicate and copy to right side of grass.
Select bird, resize to (100x114) Copy and past to right side of tag.
Select bird#2, resize to (100x108) Copy and place on right side of tag.
Merge all visible.
Select weescotlass mask #209. Apply weescotslass mask#209. Merge mask layer visible.
Select the mask you have just make. Make an extra copy of it and set aside for later use.
Select tree#1, no need to resize. Copy and paste behind mask at top right side of tag. Duplicate and place at top left side of tag just a slight higher.
Select grass, resize to (600x234) Copy and paste to bottom of tag. Erase and excess that is infront of your tube to make it look like tube is coming out of the grass.
Select painting#1, resize to (200x261) Copy and paste to lower right side of tag. Place behind grass.
Select the extra copy of finished mask that you had set aside. Resize it to (200x200). Place on top of painting to make it look like your mask is what is being painted. Then opacity, to 72.
Merge all layers.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Then add, drop shadow.
Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

PTU Tutorial - Mystical Whispers

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 26, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used two Joel Adams Tube art. You must have a license to use his art which you can get here: http://www.cdoestore.com/
PTU Scrapkit collab at Stargazer Scraps called Whispering Touch from A Taggers Scrap.  You can find this kit here: http://stargazerscraps.co.uk/
. Thanks Jo!
I used Mask #218 by weescotslass, which you can get http://weescotslasscreations.blogspot.com/
Font of your choice.
Plug-ins Xero - Porcelain
Let's begin shall we.
Open new image 600x600.
I used paper#2. Apply weescotslass mask#218. Merge mask layer visible.
Select décor#3, resize to (600x280). Copy and paste to the lower part of your tag. Duplicate and place at the top of your tag.
Select décor#2, no need to resize. Copy and place at lower left side of tag. Select again, rotate to the right twice. Copy and paste to the upper right hand side of tag.
Select butterflyscatter, resize to (600x563). Copy and paste, centering it up on your tag.
Select lamp, resize to (150x458) Copy and past to left side of tag. Duplicate and place on right side of tag.
Select frame #4, resize to (500x415). Copy and paste to center of tag.
Select flowers, resize to (300x126) Copy and paste to bottom of frame. Do this two more times placing them randomly at bottom of frame.
Select hangingflower, no need to resize. Copy and paste to upper left side of frame. Then mirror hangingflower. Copy and paste to upper right side of frame.
Select brad, no need to resize. Copy and paste to upper center of frame in between hangingflowers.
Select paper#3, resize to (400x400). Copy and paste behind frame. If you see any excess, erase it.
Select lantern, resize to (300x253). Copy and paste to upper right side of paper#3 in side of frame. No need to erase excess that is sticking out.
Select diamondscatter, resize to (300x253). Copy and paste on paper#3 in side the frame. Also behind the lantern.
Select unicorn, no need to resize. Copy and paste it to make it look like it is sitting in the frame. Erase any part of the frame to make it look like it is coming out of it.
Select tube, reaize to to fit on top of your uniforn. I resized mine to (300x253). Erase and excess of frame#4 to make it look like your tube is coming out of the frame along with the unicorn.
Select second tube, resize to (300x388). Copy and paste to upper left side of tag.
Select fairydust, resize to (600x575) Copy and paste on top of tag.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Mystical Whispers

Monday, May 23, 2011

PTU Tutorial - Seaward

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Legends Art. You must have a license to use this art, which you can get here: http://www.scrapsandthecity.com/
PTU Scrapkit called Under The Boardwalk from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
I used my FTU Mask #61, which you can get http://mistressv-signaturecollections.blogspot.com/.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open new image 600x600.
I used paper#14. Apply my mask#61. Merge mask layer visible.
Select net, resize to (600x221). Copy and paste in the middle of mask layer. Add a drop shadow.
Select net #2, resize to (500x601). Copy and paste to the right of tag. Add a drop shadow.
Select décor #1, no need to resize, copy and paste to upper right side of tag. Then select again this time mirror, and place at lower left side of tag. Add drop shadow to both items.
Select wheel. Resize to (600x600) copy and paste in center of tag.
Select tube, resize to (500x642) copy and paste under wheel. Erase portions of the wheel to make it look like tube is coming out of it. Then erase excess tube.
Merge wheel and tube, add drop shadow.
Select starfish, no need to resize. Copy and paste to left side of tag, add drop shadow. Duplicate and add to right side of tag.
Select shell #1 resize to (200x173) copy and paste on left side of tag. Add drop shadow. Duplicate and add to right side of tag.
Select shells, no need to resize. Copy and paste in lower middle of tag. Add a drop shadow.
Select shell #6, resize to (200x164). Copy and paste to bottom middle of tag. Add drop shadow.
Select word art, no need to resize. Copy and paste in front of sea shells and add a drop shadow.
Select seagull, resize to (200x133). Copy and paste on left side of word art. Add a drop shadow. Duplicate and mirror. Add to lower right side of tag.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Seaward

PTU Tutorial - Dark Emotions - Forum Set

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in May 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Verymuch Tubes art. You must have a license to use her art which you can get here http://picsfordesign.com/
 PTU Scrapkit called Dark Emotions by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Plug-ins Xero - Porcelain
Font of your choice.
Let's begin shall we.
Banner:
Open new layer 650x250.
 Select and fill with paper #DA-pp9.
Select DA-el23, no need to resize just copy to middle of tag.
Select your tube. Resize to (500x671) once again it will depend on what tube you use. Make it a close up.
Place on right side of tag. Mirror and copy to left side of tag.
Go to image, add a border. Pick the color you would like your border to be. Size your pixels to 10.
Select your magic wand, place at inside of border. Make sure you have marching ants around your border. Select effects, 3d effect, inner bevel. Set the setting to your liking
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as jpeg.
Avatar:
Open new layer 200x200
Work the same as you did with the banner, but using one tube and do not use work art.
Add your first initial to the to the bottom right side of your avatar.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as jpeg.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Thursday, May 12, 2011

FTU Frame Cluster #25

FTU Frame Cluster, just click on frame for correct size. Then right click and save to your computer. If you save, leave some love.

Tuesday, May 10, 2011

Monday, May 9, 2011

PTU Tutorial - Pink

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on May 9th 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called The Pink Life from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
I used my FTU Template called Pink, which you can get http://mistressv-signaturecollections.blogspot.com/.
Font of your choice.
Plug-ins Xero – Bad Dream
Let's begin shall we.
Open template, select your papers to fill your template. I have selected the following. Paper 4 for rec. #1. Paper 28 for rec #2. And paper 18 for the circle. Everything else I left the way it is.
Select tinyleaves, you do not need to resize. Apply to template in between the star mask and rec. #1 on left hand side of template. Duplicate and mirror tinyleaves and place on right side of template between the star mask and rec. #1.
Select wings, no need to resize. Place at top of template between star mask and  tinyleaves. Duplicate and add to bottom of template.
Select décor #2, no need to resize. Place at top of template between star mask and rec. #1.
Select diamondheart #1, no need to resize and place on upper left side of tag. Duplicate and place on right side of tag.
Select flowerscatter, no need to resize. Place in between circle dots and circle on template.
Select posey, no need to resize. Place into left hand side of circle dots in. Then duplicate and place the second one inside the circle dots on the right hand side.
Select sparkles, no need to resize. Place in between circle and word art.
Select spotlight, resize to (400x684). Place at upper right side to tag.
Select knots, no need to resize. Place it between rec. #1 and rec #2.
Select leaves #2, no need to resize. Place int between rec #1 and rec#2 on left hand side. Duplicate and place on right hand side.
Select tube, resize will very. I resized mine to (400x401). Place anywhere you like.
Add name, url, copywrite and watermark.
Merge all layers.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
 Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria

Scrapbook Version - Pink