The Brat Pack Blog Train

Pages

Friday, October 28, 2011

PTU Tutorial - Secrets Of Autumn

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on October 28th, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Jay Trembly tube art. You must have a license to use his art which you can get purchase: http://www.scrapsandthecity.com
PTU Scrapkit called Emo Autumn by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero – Bad Dream
 Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select paper#4. Apply my mask#70. Merge mask layer visible.
Select ele#49, no need to resize. Copy and paste to upper right side of tag. Re-select mirror image and copy and paste to upper left side of tag.
Select ele#1, no need to resize. You are going to make a frame out of these flowers. Keep rotating to the right until you make a frame. Copy and paste each piece to the center of the tag.
Select your tube, resizing will vary. Copy and paste behind the flower frame. Erase any unwanted exposure. You want it to look like your tube is coming out of the frame.
Select ele#7, no need to resize. Copy and paste at bottom of your flower frame in center.
Select ele#48, resize to (200x129). Copy and paste 3 times. One to the bottom left side of tag, one in center at the bottom and one to the right bottom side.
Select ele#5, resize to (200x128) Copy and paste to lower left side of tag on top of leaves. Reselect, mirror image and copy and paste to lower right side of tag on top of leaves.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Saturday, October 15, 2011

♥BEAUTI~LICIOUS AWARD♥

BEAUTI♥LICIOUS AWARD!

This award is for the Beautiful Women (and Men)
who grace us with their talents
in the Tagger Community.
The intent of this award is to pass it on
to the Designer, Tagger, or Artist
who has inspired you with their endless talent
and who has touched your heart.
There are many out there.
Let's see how far we can pass this on.
Once you have received this award
Please pass it on to five blogs
to show some love
for those who truly are BEAUTIFUL.

*I just got this award*
♥Thank you, Savage♥

I choose to pass it to:


Wednesday, October 5, 2011

FTU Kit - Ice Cold Steampunk

I made this tag using Ditz Bitz part of the Heartbeatz Creationz's blog train
You can find this and other goodies by visiting her site here.

Monday, October 3, 2011

PTU Tutorial - Weegie

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Ted Hammond tube art. You must have a license to use his art which you can get purchase: http://www.cdoestore.com/
PTU Scrapkit called Lil Witchy Poo by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask# 62, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero - Porcelain
 Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select paper#9. Apply my mask#62. Merge mask layer visible.
Select ele32, no need to resize. Copy and paste to mask at the top.
Select ele9, resize to (600x144). Copy and paste at top of tag.
Select ele33, no need to resize. Copy and paste twice.  Once to lower left side of tag and one to lower right side of tag.
Select ele31, resize to (400x309). Copy and paste to center bottom of tag.
Select tube. Resizing will vary. Copy and paste to bottom of tag. Erase excess of tube. Make it look like she is coming out of the board.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


FTU Tutorial - Boo!

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
FTU Scrapkit called A Spooky World. by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 76, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used pp04. Apply my mask#76. Merge mask layer visible.
Select ele#13, resize to (500x500). Copy and paste to left side of tag. Reselect, mirror and copy and paste to right side of tag.
Select ele27, resize to (200x275). Copy and paste to lower left side of tag.
Select ele26, resize to (200x344). Copy and paste to lower sent of tag.
Select ele25, resize to (200x295). Copy and paste to lower right side of tag.
Select ele29, resize to (600x295). Copy and paste at top of tag.
Select ele30, resize to (200x74). Copy and paste below ele29.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Color My World

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Robert Alvarado. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called Colors of Joy from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2011/04/colors-of-joy.htmlThanks Deanna
Mask of choice. I used my mask# 70, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Bad Dream
 Let's begin shall we.
Open a new image,  600x600.
I used paper#10. Apply my mask#70. Merge mask layer visible.
Select circle02, resize to (300x279). Copy and paste to upper left side of tag. Add a drop shadow.
Select circles01, resize to (300x279). Copy and paste to lower right side of tag. Add a drop shadow.
Select ribbon01, resize to (300x364). Copy and paste twice, once to upper right side of tag and the next to the lower left side of tag. Add a drop shadow to both.
Add a circle text using paper10. Write “Color my world”. Add a drop shadow.
Select hearts, no need to resize. Copy and paste to middle towards the bottom of tag. Add a drop shadow.
Select paper06, resize to (300x300). Copy and paste behind pink heart. Erase any excess you do not need.
Select paper05, resize to (225x225). Copy and paste behind yellow heart. Erase any excess you do not need.
Select tube, resizing will vary. Copy and paste between paper and hearts. Erase to expose your tube, leaving the yellow heart in tact.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria