FTU Tutorial - Punkish Queen

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on January 30, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/

FTU Scrapkit called Roller Punks by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#01. Apply my mask#74. Merge mask layer visible.

Select frame#10, resize to (500x500). Copy and paste to mask.

Select paper#19, Resize to (400x400). Copy and paste behind frame. Erase any excess you do not need.

Select tube, resizing will vary. Copy and paste behind frame. Erase part of frame to make it look like tube is coming out of frame.

Select dangle01, resize to (200x380). Copy and paste to right side of frame on corner.

Select bow11, resize to (300x200). Copy and paste at bottom of frame.

Select cap2, resize to (200x200). Copy and paste to right side of tag on corner of frame.

Select skates02, resize to (200x212). Copy and paste to left side of tag.

Select teddy01, resize to (200x200). Copy and paste to left side of tag in front of skates.

Select bottle01, resize to (200x200). Copy and paste to bottom right side of tag.

Select bottle02, resize to (200x200). Copy and paste in front of bottle01.

Select flower03 and 04, resize to (100x100). Copy and paste randomly around the tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



FTU Tutorial - To Paris With Love

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on December 30, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com

FTU Scrapkit called Love in Paris by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 80, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#05. Apply my mask#80. Merge mask layer visible.

Select element#06, resize to (500x544). Copy and paste to center of tag.

Select element#48, no need to resize. Copy and paste to bottom of tag.

Select element#16, resize to (200x300). Copy and paste to upper top center of tag.

Select element#55, no need to resize. Copy and paste to middle of tag.

Select element#51, resize to (200x341). Copy and paste on top of mannequin white.

Select element#52, resize to (200x275). Copy and paste to mannequin black.

Select element#45, no need to resize. Copy and paste to upper right corner of tag.

Select again this time flip image. Copy and paste to lower left side of tag.

Select element#46, no need to resize. Copy and paste to middle right side of tag.

Select element#16, no need to resize. Copy and paste to bottom center of tag.

Select tube, sizing will vary. Copy and paste on top of element#16.

Select element#21, resize to (100x178). Copy and paste to lower right side of tag.

Select element#50, resize to (100x38). Copy and paste to bottom of tag on right side.

Select element#49, resize to (100x76). Copy and paste to bottom of tag on right side.

Select element#22, resize to (50x100). Copy and paste on couch under your tube.

Select element#47, resize to (50x50). Copy and paste above element#22.

Select element#18, resize to (100x120). Copy and paste to lower left side of tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

FTU Tutorial - Purple Passion

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/

.FTU Scrapkit called Free Like A Bird by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used paper#4. Apply my mask#74. Merge mask layer visible.

Select elem02, resize to (600x417). Copy and paste to center of tag.

Select elem17, no need to resize. Copy and paste to bottom of tag.

Select again, this time flip and paste to the top of tag.

Select elem05, resize to (600x587). Copy and paste to center of tag. Add a drop shadow.

Select elem1, resize to (300x225). Copy and paste at the top of elem05. Add a drop shadow.

Select paper03, resize to (400x400). Copy and paste behind frame. Erase any excess showing.

Select elem21, resize to (200x200). Copy and paste to lower left side of frame.

Select elem19, resize to (200x189). Copy and paste to middle right side of frame.

Select tube, resizing will vary. Copy and Paste behind frame. Erase excess frame to make it look like your tube is coming out of the frame.

Select tube again. Resizing will vary. Copy and paste another version of you tube on the right hand side of your tag.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



FTU Tutorial - Boo!

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written on October 3rd, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

FTU Scrapkit called A Spooky World. by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!

Mask of choice. I used my mask# 76, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.

 Let's begin shall we.

Open a new image,  600x600.

I used pp04. Apply my mask#76. Merge mask layer visible.

Select ele#13, resize to (500x500). Copy and paste to left side of tag. Reselect, mirror and copy and paste to right side of tag.

Select ele27, resize to (200x275). Copy and paste to lower left side of tag.

Select ele26, resize to (200x344). Copy and paste to lower sent of tag.

Select ele25, resize to (200x295). Copy and paste to lower right side of tag.

Select ele29, resize to (600x295). Copy and paste at top of tag.

Select ele30, resize to (200x74). Copy and paste below ele29.

Add name, url, copywrite and watermark.

Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria



PTU Tutorial - Steampunked Sweetheart

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in June 3, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of Myka Jelina. You must have a license to use her art which you can get here: http://mykasgraphics.bigcartel.com/ . You will want to select a tube with a close up and a profile.

FTU Scrapkit called Steampunk in Aqua from Ditz Bitz.  You can find this kit here: http://ditzbitz.weebly.com/index.html Thanks Brenda. Now Brenda’s kit is a full size Scrapbooking kit. I am going to resize to tagger size. I will show it as a tag, and a scrapbooking page when finished.

Mask of choice. I used Vix mask362 , which you can get here: http://www.freewebs.com/vixpsp/masks.htm.

Font of your choice.

Plug-ins Xero – Bad Dream

Let's begin shall we.

Open new image as 600x600.

I used paper ditz_alkfo. Apply Vix mask#362. Merge mask layer visible.

Select ditz_aquatgs-2b, resize to (525x575). Copy and paste, behind finished mask.

Select ditz_897bi8nh, resize to (300x301). Place at upper left side of frame. Select again, and copy to lower right side of frame.

Select ditz_SPfowr9d, resize to (200x204). Copy and paste to upper left side of tag just below the gear you just placed. Select again, do the same to the lower right side of tag.

Select dizt_2ak1673, resize to (400x369). Copy and paste to center of tag. Add a drop shadow.

Select ditz_ajk079, resize to (400x400). Copy and paste behind the frame. Erase any excess paper you do not want.

Select your tube close up. Sizing will vary depending on your tube. I resized mine to (400x400) I did erase any excess that was showing. Add a drop shadow.

Select dizt_SPmisc1c, rotate right,  resize to (300x139). Copy and paste to upper right side of frame.

Select ditz_SPbowz1, resize to (200x143). Copy and paste to upper right side of frame, over key.

Select your profile tube. Sizing will vary depending on your tube. I resized mine to (600x600). Copy and paste to the left side of your tag.

Merge all layers.

Add a drop shadow.

Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

**Scrapbook Page**

Open a new image (800x800).

Select dizt_78512uio2689, resize to (800x800). Copy and paste to new image.

Select finished tag, resize to (700x700). Copy and paste to center of paper.

Merge all layers.

Save as a jpeg.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Tutorial - Serenity

This is a FTU Tutorial by insatiabledreams called Serenity. You can find it here.

Tag made for me using my FTU Kit

Savage from Redneck Tuts by Savage made this tag for me using my FTU Scrap Kit Pink is for girls. You can find her wonderful tutorial it's called: Strut Your Stuff here. If you follow leave her some love.

FTU Tutorial (No Scraps) - Garvey Girls Come To Life

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.

This tutorial was written in 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

 

Supplies Needed:

Plug-ins Xero - Porcelain

I am using the beautiful tubes by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com

Open a new image (1000x1000).

Hit your print screen button.

Right click on your blank image, paste, as a new section. A-line the new image of you PSP in the center.

Promote to a layer. Select none.

Select your crop tool. I just selected the front of my screen. When you have selected the area you want as your frame, apply.

Select your freehand select tool. Select the inside of your PSP screen and delete. This should make your PSP a frame.

Now resize your PSP frame to (500x?) The size may very depending on what areas you selected for your frame.

Open a new image (600x400)

Copy and paste your PSP frame onto your new blank image. High center your fame.

Open a new image (500x?) Fill it with any color you wish. Then copy and paste behind your PSP frame.

Now it is time to select your tubes. First thing you need to remember is, all tubes must be by the same artist. You can not mix and match different artist on a tag.

I choice Keith Garvey. Resize each tube so they look like they are climbing out of your frame. This is the whole point of this tag.

Once you have placed each tube where you want them, merge all layers.

Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.

Add name, url, copywrite and watermark.

Resize, to the size you want your finished tag to be.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

FTU Tutorial - Spring

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.

This tutorial was written in 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:

Tubes of your choice. I used the art of Dean Yeagle. You must have a license to use his art which you can get here: http://www.cdoestore.com/

FTU scrapkit from A Taggers Scrap that is her part of the Gothic Inspirations blogtrain you can download this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!

Mask of choice. I used my mask11, which you can get http://mistressv-signaturecollections.blogspot.com/.

Font of your choice.

Plug-ins Xero - Porcelain

Let's begin shall we.

 

File new 600x600.  I used paper#10. Apply my mask#11. Merge mask layer visable.

Resize Frame# 3 (400x415) and place on top of mask and promote to a new layer, select none. Go to effects and give it a drop shadow.

Select your tube. Resize your tube to fit into your frame paste as new layer. Duplicate your frame and place your tube in between them. Select your eraser tool and go to your top layer frame and erase the portion of the frame to expose your tube. Then select your tube layer and erase the unwanted portion of the tube.

Select grass and paste as new layer. Duplicate layer 3 times and arrange them at the bottom of your frame making it look like a window.

Select and resize bird (100x82) paste as a new layer. I placed the bird by my tube so it looks like she is looking at it. Promote to a layer and select none. I also duplicated the bird two more times and placed them randomly.

Select word art (spring) paste as a new layer and place at the top of your tag. Promote as layer and select none.

Merge all visible layers. Go to effects, select plug-ins, Xero, and porcelain. Pick your own setting.

Add name place to bottom of the grass.

Add url, copywrite and watermark.

Resize, merge layers visible.

Save as PNG.

And woohoo, you are finished!

Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.

Smooches,

**Victoria**

©Signature Collections-Tutorials By Victoria

My Precious Daisy

I am using a great tutorial by Scrapbooking-bytes. You can find that tutorial here.

Being Me

I am using a FTU Tutorial by Jessica LaLa Land called Take Note. You can find it here.

Stupid Cupid Stop Picking On Me

I am using a FTU Tutorial by Peachies Designs and Tutorials called Stupid Cupid. You can find it here.

Naughty Love

I am using a FTU Tutorial by Return to Innocence called Naughty Love. You can find it here.

Love Yourself

I am using a pretty FTU Tutorial by Return to Innocence called Love Yourself. You can find it here.

Long Winters Nap

I am using a wonderful FTU Tutorial by Angela's Tut's and Tag's called Long Winters Nap. You can find it here. If you follow, please leave her some love.

It's a pirate's life for me, heehee

I am using a FTU Tutorial on how to mist a tube by Signature Collections Tutorials. You can find it here. If you use, please leave me some love.

No Looking Back

I am using a beautiful FTU Tutorial by Ladyhawwk Designs called No Looking Back. You can find it here.

Jingle All The Way

I am using a fun FTU Tutorial by Dramtic Sun called Jingle All The Way. You can find it here.

I love Snow

I am using a fun FTU Tutorial by Peace's Creations called Love Snow. You can find it here. If you follow, please leave her some love.

Merry Christmas Baby

I am using a wonderful FTU Tutorial by PSP Lessem met Viviane called Merry Christmas. You can find it here.