The Brat Pack Blog Train

Pages

Monday, November 28, 2011

FTU Tutorial - Purple Passion

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/
.FTU Scrapkit called Free Like A Bird by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#4. Apply my mask#74. Merge mask layer visible.
Select elem02, resize to (600x417). Copy and paste to center of tag.
Select elem17, no need to resize. Copy and paste to bottom of tag.
Select again, this time flip and paste to the top of tag.
Select elem05, resize to (600x587). Copy and paste to center of tag. Add a drop shadow.
Select elem1, resize to (300x225). Copy and paste at the top of elem05. Add a drop shadow.
Select paper03, resize to (400x400). Copy and paste behind frame. Erase any excess showing.
Select elem21, resize to (200x200). Copy and paste to lower left side of frame.
Select elem19, resize to (200x189). Copy and paste to middle right side of frame.
Select tube, resizing will vary. Copy and Paste behind frame. Erase excess frame to make it look like your tube is coming out of the frame.
Select tube again. Resizing will vary. Copy and paste another version of you tube on the right hand side of your tag.
Add name, url, copywrite and watermark.

Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Sexy Merry Christmas

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Robert Alvarado Tubes art. You must have a license to use her art which you can get here http://psptubesemporium.com
PTU Scrapkit called Jolly Christmas from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Bad Dream
 Let's begin shall we.
Open a new image,  600x600.
I used paper#18. Apply my mask#78. Merge mask layer visible.
Select tree2, resize to (600x600). Copy and paste on center of mask.
Select wordart, resize to (600x587). Copy and paste on top of tree.
Select tube, resizing will vary. Copy and paste it on top of Christmas. Erase portions of Christmas so the your tube appears woven into it.
Add a drop shadow to tube and wordart.
Select the different color ornaments, resize them to different sizes. Copy and paste the all around the wordart. Make sure it looks like that are hanging from the words. Add drop shadows to all the ornaments.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Erotic Christmas

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Barbara Jensen Tubes art. You must have a license to use her art which you can get here http://www.eroticartistgallery.com
PTU Scrapkit called Ice Aqua Xmas from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero - Radiance
 Let's begin shall we.
Open a new image,  600x600.
I used paper#7. Apply my mask#78. Merge mask layer visible.
Select glitter#2, no need to resize. Copy and paste to center of tag.
Select snowflakescatter, resize to (300x445). Copy and paste twice. Once to upper left side of tag, then to lower middle of right side of tag.
Select sparkles#5, no need to resize. Copy and paste to upper center of tag.
Select tree#3, resize to (300x570). Copy and paste to center of tag.
Select presenthanger, no need to resize. Copy and paste at top of tree. Select your eraser, erase part of the hanger to were it looks like it is hanging from the star on the tree.
Select giftboxes, resize to (200x200). Copy and paste to left side bottom of tree.
Select present#4, resize to (200x200). Copy and paste to bottom right side of tree.
Select present#1, resize to (100x100) Copy and paste in front of gift boxes on left hand side.
Select present#5, no need to resize. Copy and paste on left side behind gift boxes.
Select giftbox#3, resize to (150x150). Copy and paste to lower right side of tag.
Select snowman, no need to resize. Copy and paste to right side of tag. Place him behind some presents.
Select the bears, no need to resize. I cut out the small bear from the scrap. I then copied and pasted him on top of the giftboxes.
Select tube, resizing will vary. Copy and paste to behind present on left hand side.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Saturday, November 26, 2011

FTU Mask #78

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love. 


Wednesday, November 16, 2011

PTU Tutorial - Pinky Sweet

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on November 16, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.
PTU Scrapkit called Simply Elegant by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#11. Apply my mask#73. Merge mask layer visible.
Select ele32, no need to resize. Copy and paste to center of mask.
Select ele09, no need to resize. Copy and paste on top of ele32.
Select ele01, resize to (500x500). Copy and paste to lower center of tag.
Select paper06, resize to (400x400). Copy and paste behind the frame. Erase any excess you do not need.
Select tube, resizing will vary. Copy and paste to center of tag.
Select ele08, resize to (600x171). Copy and paste to bottom of tube.
Select ele50, resize to (600x78).Copy and paste on top of ele08.
Select ele45, resize to (100x100). Copy and paste twice, once to upper left side of tag. Then another to the middle right side of tag.
Select ele39, no need to resize. Copy and paste to upper right side of tag.
Select ele35, no need to resize. Copy and paste over tube.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Monday, November 7, 2011

PTU Tutorial - Material Girl

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 7, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Barbara Jensen. You must have a license to use her art which you can get here: http://www.scrapsandthecity.com
PTU Scrapkit called Breakfast At Tiffanysl from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Plus her freebie!  Thanks Jo!
Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero –  Porcelain
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper18. Apply my mask 73. Merge mask layer visible.
Select glittersplatter2, resize to (400x549). Copy and paste to right side of tag.
Select glittersplatter, mirror image, resize to (400x459). Copy and paste to left side of tag.
Select frame1, resize to (600x580). Copy and paste to center of tag. Add a drop shadow.
Select tube, resizing will vary. Copy and paste inside of frame. Erase any excess you do not want showing.
Select wings, resizing will vary. Copy and paste behind your tube. Erase any excess you do not need.
Select bottles, resize to (200x253) Copy and paste to bottom left side of tag.
Select beads4, no need to resize. Copy and paste at bottom center of tag.
Select violin. No need to resize. Copy and paste to lower right side of tag.
Select hatbox, resize to (150x150). Copy and paste to lower right side of tag on top of violin.
Select ring holder, no need to resize. Copy and paste to lower left side of tag on top of bottles.
Select shoes3, resize to (150x154). Copy and paste to lower left side of tag on top of bottles, and ring holder.
Select box4, resize to (150x173). Copy and paste slightly behind hatbox.
Select box2, resize to (150x157). Copy and paste to lower right side of tag behind hat box.
Select box3, resize to (150x210). Copy and paste behind shoes on left side.
Select purse2, resize to (150x118). Copy and paste to left side of tag.
Select ring, resize to (100x133). Copy and paste at bottom center of tag.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Porcelain
. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Sexy Pilgrim

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on November 7, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.
PTU Scrapkit called Autumn Love by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/
 Font of your choice.
Let's begin shall we.
Open new image 600x600.
Select paper#10. Apply my mask#77. Merge mask layer visible.
Select ele8, resize to (400x422). Copy and paste twice. Once to upper left side of tag and the other to the upper right side of tag.
Select frame2, resize to (400x400). Copy and paste to center of tag.
Select paper5, resize to (350x350). Copy and paste behind frame. Erase any excess you do not want showing.
Select ele19, resize to (400x258). Copy and paste behind frame and paper on bottom left side of tag. Select again, this time mirror image and place behind paper and frame on bottom right side.
Select tube, resizing will vary. Copy and paste in to frame. Erase any excess you do not want showing.
Make a circle text. I used paper4. Write “Want to help me stuff the turkey?” Add a drop shadow.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Kit - Elegant Steam

I am using a PTU Kit called Elegant Steam by Ditz Bitz. You can purchase it here.


FTU Gemeinschaftskit the Friends of Bastelcity Kit

Six designers create a kit
and these designers were there
AngelasDreamz
Anita
FantasyDreamzDesignz
Schnuppe
Bärbel
Maryann63
I am using Fantasy Dreamz Designz portion of this amazing kit. You can find it here. If you download, leave her some love.

Sunday, November 6, 2011

PTU Tutorial - Breaking Dawn

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written November 6, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tubes by Zindy S. D. Nielsen. You can find her art here: http://zindy-zone.dk
PTU Scrapkit called On the Veranda by Butterfly Kisses Scraps.  You can find this kit here: http://bkscraps.blogspot.com/2011/10/on-veranda.html Thanks Deanna!
I used my FTU Template called Twilight, which you can get http://mistressv-signaturecollections.blogspot.com/
Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/

Font of your choice.
Let's begin shall we.
Open template, select your papers to fill your template. Deselect background. I have selected the following. Paper 10 for top and bottom rectangle. Paper 6 for circle text with drop shadow. Paper 6 for black rectangle.
Open a new layer, 600x600. Select paper 4. Apply to my mask#77. Merge mask layer visible. Copy and paste behind template.
Select spill1, resize to (600x260). Copy and paste behind moon.
Select spill02, no need to resize. Copy and paste twice, once at upper right side of tag behind the moon. Then the other at the lower left side behind the moon.
Select frame4, resize to (500x306). Copy and paste over the moon. Add a drop shadow.
Select paper2, resize to (300x300). Copy and paste behind frame4 under big circle. Erase excess that you do not need.
Select paper10, resize to (300x300). Copy and paste behind frame4 under the little circle. Erase excess that you do not need.
Select your tubes, resizing will vary. Place them in side the frame.
Select flowerswirl, resize to (400x176). Copy and paste twice. One on top of frame and one below frame.
Select swirl2, resize to (600x213). Copy and paste behind moon and circle text in center.
Add name, url, copywrite and watermark.
Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Woodland Fairy

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 6, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used art by Fantasy Art by Denise Pauline You can purchase her art here: http://swtmelode.com
PTU Scrapkit called Woodland Harmony from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Mask of choice. I used my mask# 77, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Bad Dream
 Let's begin shall we.
Open a new image,  600x600.
I used paper#9. Apply my mask#77. Merge mask layer visible.
Select decor1, resize to (600x597). Copy and paste to mask.
Select leafscatter2, no need to resize. Copy and paste to upper right side of tag. Reselect, mirror, copy and paste to left lower side of tag.
Select floatingblooms, resize to (600x600). Copy and paste to right side of tag. Reselect, mirror, copy and paste to left side of tag.
Select lantern, no need to resize. Mirror, copy and paste to left side of tag.
Select sunlight, no need to resize. Copy and paste on top of glass on lantern.
Select your tube, sizing will vary. Copy and paste to lower center of tag.
Select leaves2, no need to resize. Copy and paste to bottom of your tube.
Select glasspepples, resize to (600x295). Copy and paste to bottom of tag.
Select mushroom2, reside to (100x167). Copy and past to right side of tube. Reselect, mirror, copy and paste to left side of tube.
Select wateringcan, resize to (200x148). Copy and paste to lower left side of tag.
Select fungi, no need to resize. Copy and paste to lower right side of tag.
Select flowers3, resize to (200x200). Copy and paste at bottom center of tag. Reselect, resize to (100x100). Copy and paste to bottom left of tag and bottom right of tag.
Select fox, resize to (200x240). Copy and paste to bottom left side of tag.
Select chipmunk, resize to (100x100). Copy and paste to bottom right side of tag.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria