The Brat Pack Blog Train

Pages

Wednesday, October 10, 2012

FTU Kit - Trick Or Treat

Hello everyone, I am back with a new FTU Kit called Trick or Treat. Hope you enjoy!!
You can download it here
Leave some love it you download. Smooches!!

Wednesday, March 14, 2012

The Brat Pack Blog Train - Another World

It's time for the latest Brat Pack Blogtrain.  It's called Another Wold.  This is my contribution.  Click the Frame Cluster above to bring up correct size. Then right click and save to your computer.
Now hop on board the train and visit some of the other stations.



Tootypup: Tootypup Scraps

Anita: Daydreamers

Anita: LorenzenDesign Scrap

Becky: Becky's Creations

Bratti: Brattitude Scraps

Ketty: Charlieonline

Miriam: Ellanoir

Paula: CraftyPoly

Pink: Pink's Poetic Scraps

Seven (Sarah): Bondaged Princess Designs

Stu: CreativeCrazyScraps

Suzy: SuzyQ Designs

Victoria: Signature Collections - You are here

Tuesday, March 13, 2012

FTU Kit - Happy Easter

Personal Use Only. You can download my FTU Kit Happy Easter here. Leave some love.


FTU Kit - Lavender

Personal use only. You can downlaod my FTU Kit Lavender here. Leave some love!


Monday, March 12, 2012

Exclusive PTU Kit: For The Love Of Garrett - Heavenly Angel

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on March 12, 2012.
This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used the art of Barbara Jensen. You must have a license to use her art which you can get here: http://www.eroticartistgallery.com/
PTU Scrapkit called For The Love Of Garrett Blair by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask#90, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero – Porcelain
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper#07. Apply my mask#90. Merge mask layer visible.
Select ele#20, resize to (400x562). Copy and paste to upper left side of tag.
Select ele#4, resize to (400x380) Copy and paste to center of tag. Add a drop shadow.
Select tube, resizing will vary. Copy and paste on top of element#4. Erase part of tube to make element#4 look like a frame.
Select ele#8, no need to resize. Copy and paste several time around your tag.
Select ele#10, no need to resize. Copy and paste to bottom of tag.
Go to effects, plugins, xero, Porcelain
Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Sweet Love

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on March 12, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called All For Sweet Love by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 90, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#01. Apply my mask#90. Merge mask layer visible.
Select ele#50, no need to resize. Copy and paste on top of mask.
Select ele#44, no need to resize. Copy and paste to left side of tag.
Select ele#34, resize to (500x414). Copy and paste to center of tag.
Select ele#27, no need to resize. Copy and paste to top of tag.
Select paper#07, resize to (500x500). Copy and paste behind frame. Erase any excess you do not need.
Select ele#20, no need to resize. Cope and paste twice, once to upper right side of tag and again to bottom left side of tag.
Select ele#14, resize to (200x200). Copy and paste to bottom of frame on left side.
Select ele#46, resize to (200x200). Copy and paste twice, once to upper right side of tag and again to bottom left side of tag.
Select tube, resizing will vary. Copy and paste to make it look like they are coming out of the frame. Erase any excess you do not need.
Add name, url, copywrite and watermark.

Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Kits - Jolie

 You can find the fun PTU Kit by Butterfly Kisses here

PTU Kit - Ravishing

You can purchase this beautiful PTU Kit by Dizt Bitz here


FTU Mask #90

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


Tuesday, March 6, 2012

FTU Maks #89

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


FTU Mask #88

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


Thursday, February 16, 2012

FTU Mask #87

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


Tuesday, February 14, 2012

Monday, February 13, 2012

PTU Tutorial - Don't Love Me

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on February 13, 2012.
This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tube of your choice. I used the art of Ismael Rac. You must have a license to use his art which you can get here: http://store.xeracx.net
PTU Scrapkit called Don’t Love Me by NaughtyAngelzCreationz.  You can find this kit herehttp://naughtys-creations.blogspot.com
Thanks NaughtyAngel
Mask of choice. I used my mask#18 and #70, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero – Bad Dream
Font of your choice.
Let's begin shall we.
Open new image 600x600.
Use paper#09. Apply my mask #70. Merge mask layer visible.
I used paper#09. Apply my mask#18. Merge mask layer visible. Copy and paste on top of mask#70.
Select el#15, resize to (300x150). Copy and paste to lower right side.
Select el#2, resize to (550x207). Copy and paste to bottom of tag.
Select frame#2, resize to (400x400). Copy and paste to upper center of tag, Add a drop shadow.
Select paper#09, resize to (400x400). Copy and paste behind frame. Erase any excess you will not need.
Select tube, resizing will vary. Copy and paste behind frame. Erase any excess you do not need of frame and tube. We want the tube too look like it is coming out of the frame.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Little Ballerina

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on February 13, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
PTU Scrapkit called Ballerina Girl by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 86, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#14. Apply my mask#86. Merge mask layer visible.
Select ele#26, no need to resize. Copy and paste on to mask.
Select ele#30, no need to resize. Copy and paste on tag.
Select ele#29, no need to resize. Copy and paste on tag.
Select ele#42, no need to resize. Copy and paste to center of tag.
Select pap#14, resize to (500x500). Copy and paste behind ele#42. Erase any excess you do not need.
Select ele#37, no need to resize. Copy and paste in front of frame.
Select ele#45, resize to (300x182). Copy and paste twice once to bottom left side of tag and the other to bottom right side of tag.
Select ele#47, resize to (100x234). Copy and paste to bottom right side of tag.
Select ele#24, resize to (500x349). Copy and paste to bottom of tag.
Select ele#36, resize to (150x79). Copy and paste to bottom center of tag.
Select ele#22, resize to (100x210) Copy and paste to bottom left side by end of frame.
Select ele#17, no need to resize. Copy and paste to bottom of tag.
Select ele#21, resize to (100x68). Copy and paste to bottom right side of tag by shoes.
Select ele#28, no need to resize. Copy and paste to bottom of tag.
Select ele#32, resize to (100x100). Copy and paste twice. Once to upper left side of tag and again to upper right side of tag.
Select ele#49, resize to (100x126) Copy and paste in front of rose vase.
Select ele#46, resize to (100x77). Copy and paste on right side of purse.
Select ele#39, resize to (200x172). Copy and paste to far right side of tag.
Select ele#38, resize to (200x260). Copy and paste to far left side of tag.
Add name, url, copywrite and watermark.

Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Friday, February 10, 2012

PTU Tutorial - Garvey Love

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in February 10, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called Jolie from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2012/02/shabby-chic.htmlThanks Deanna
Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Improver
 Let's begin shall we.
Open a new image,  600x600.
I used paper03. Apply my mask#79. Merge mask layer visible.
Select frame03, resize to (400x472) Copy and paste to center of tag. Add a drop shadow.
Select paper01, resize to (400x400), Copy and paste behind frame. Erase any excess you do not need.
Select bow02, resize to (200x266) Copy and paste to upper left side of frame.
Select Love02, resize to (200x200). Copy and paste to upper right side of frame.
Select tube, resizing will vary. Copy and paste behind frame. Erase part of the frame to make it look like she is coming out of frame.
Select frame01, resize to (400x271) Copy and paste to bottom of frame. Add a drop shadow.
Select paper03, resize to (200x200) Copy and paste 3 time to the backgrounds for each frame. Erase any excess you do not need.
Select 3 different tubes by the same artist. Resize them to fit each frame. Erase any excess you do not need.
Select leaves03, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.
Select leaves01, resize to (200x200). Copy and paste behind frame01 on upper right side. Select again and mirror. Copy and paste on upper left side of frame01.
Select pillow02, resize to (200x200) Copy and paste behind bottom frame on left side.
Select pillow01, resize to (200x200). Copy and paste behind frame on right side.
Select different ribbons from the kit. Resize them and place them randomly around the tag.
Select pitcher and pot, resize both to (150x150) Copy and paste them both behind frame01 on right side of tag.
Select shabby flowers 01 and 02, resize both to (150x131). Copy and paste both of them behind frame01 on left side of tag.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Improver. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Wednesday, February 8, 2012

PTU Kit - Sweet Emotions

I made this tag called Sweet Emotions using a PTU kit by Ditz Bitz called Lily. You can purchase her kits here.


FTU Mask #86

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.

Monday, January 30, 2012

FTU Tutorial - Punkish Queen

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on January 30, 2012. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/
FTU Scrapkit called Roller Punks by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#01. Apply my mask#74. Merge mask layer visible.
Select frame#10, resize to (500x500). Copy and paste to mask.
Select paper#19, Resize to (400x400). Copy and paste behind frame. Erase any excess you do not need.
Select tube, resizing will vary. Copy and paste behind frame. Erase part of frame to make it look like tube is coming out of frame.
Select dangle01, resize to (200x380). Copy and paste to right side of frame on corner.
Select bow11, resize to (300x200). Copy and paste at bottom of frame.
Select cap2, resize to (200x200). Copy and paste to right side of tag on corner of frame.
Select skates02, resize to (200x212). Copy and paste to left side of tag.
Select teddy01, resize to (200x200). Copy and paste to left side of tag in front of skates.
Select bottle01, resize to (200x200). Copy and paste to bottom right side of tag.
Select bottle02, resize to (200x200). Copy and paste in front of bottle01.
Select flower03 and 04, resize to (100x100). Copy and paste randomly around the tag.
Add name, url, copywrite and watermark.

Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - It's A Crime

 
This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on January 30, 2012.
This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tube of your choice. I used Victoria Raber Tube art.
PTU Scrapkit called Sexy Biker Babes by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask#75, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero – Bad Dream
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper#10. Apply my mask#75. Merge mask layer visible.
Select el#40, no need to resize. Copy and paste to upper center of mask.
Select fr3, resize to (500x400). Copy and paste to lower center of tag.
Select tube, resizing will vary. Copy and paste behind frame. Erase any excess of frame you do not need to make it appear that tube is coming out of the frame. Add drop shadow.
Select pp#3, resize to (400x400). Copy and paste behind frame and tube. Erase any excess you do not need.
Merge tube, frame and paper together. Add a drop shadow.
Select el#39, no need to resize. Copy and paste to bottom right side of tag. Add a drop shadow.
Merge together with frame.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Select el#24, resize to (200x99). Copy and paste to upper left side of tag.
Add name, url, copywrite and watermark.
Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria